Updated Nov-2023 100% Cover Real HPE0-S60 Exam Questions - 100% Pass Guarantee
Use Real HP Dumps - 100% Free HPE0-S60 Exam Dumps
HP HPE0-S60 Certification Exam is designed to assess the knowledge and skills of IT professionals in HPE Compute Solutions. HPE0-S60 exam is intended for individuals who are interested in demonstrating their proficiency in configuring, managing and troubleshooting HPE Servers, Storage and Networking solutions. HPE0-S60 exam is also suitable for individuals who want to validate their expertise in supporting HPE Hybrid IT solutions.
HP HPE0-S60 (Delta - HPE Compute Solutions) certification exam is designed for IT professionals who are seeking to validate their skills in the HPE compute solutions domain. Delta - HPE Compute Solutions certification exam is targeted at candidates who already have an HPE ASE or HPE ATP certification and want to update their skills in the latest HPE compute solutions technologies. Passing HPE0-S60 exam will demonstrate that the candidate has the knowledge and skills required to architect, design, install, configure, and manage HPE compute solutions.
NEW QUESTION # 42
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
Answer:
Explanation:
1 - Create a logical interconnect group with uplink sets.
2 - Create a logical enciosure.
3 - Create an enciosure group.
4 - Create server profile templates and server profiles.
5 - Define all required networks.
NEW QUESTION # 43
Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?
- A. HPE OneView offers limited support tor HPE Primera because of the firmware differences
- B. Management procedures and features are the same tor both types of the array
- C. HPE OneView offers additional functionalities for HPE Primera like CPG management
- D. To manage HPE Primera using HPE OneView. a dedicated license is required
Answer: C
NEW QUESTION # 44
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex 280 They plan to manage new components using HPE OneView What must be done to achieve this goal?
- A. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- B. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
- C. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
- D. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
Answer: B
NEW QUESTION # 45
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
1 - Add vCenter Server to HPE OneView for VMware vCenter Server.
2 - Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
3 - Upload HPE-friendly ESXi image.
4 - Deploy new ESXi systems using vCenter Server interface.
NEW QUESTION # 46
What is a limitation when creating a server profile?
- A. Administrator cannot define more than 8 connections within a server profile
- B. BIOS settings can be changed only when UEFI optimized is selected as boot mode
- C. ILO management is limited to the integration with Active Directory or LDAP
- D. It is not possible to create shared volumes on demand through a server profile
Answer: C
NEW QUESTION # 47
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
NEW QUESTION # 48
Match HPE SimpliVity team with the definition.
Answer:
Explanation:
NEW QUESTION # 49
Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?
- A. HPE OneView IT HPE Persistent Memory firmware must be updated.
- B. HPE SUM if HPE Persistent Memory firmware must be updated
- C. RMC CLI to update I/O and HPE Persistent Memory firmware
- D. HPE OneView method for I/O firmware update procedure
Answer: C
NEW QUESTION # 50
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
- B. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- C. Enable FC primary and secondary boot on the modules through the HPE OneView interface
- D. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
Answer: A
NEW QUESTION # 51
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 52
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?
- A. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
- B. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
- C. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy
- D. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
Answer: B
NEW QUESTION # 53
Your customer plans to manage HPE Primera using HPE Oneview
Which storage management tasks can be completed using HPE OneView for this environment?
- A. CPG management
- B. Replication setup
- C. Volume provisioning
- D. Cache management
Answer: C
NEW QUESTION # 54
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
- B. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
- C. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
- D. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
Answer: B
NEW QUESTION # 55
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
- B. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
- C. Both HPE Synergy Gen10 full-height compute module plugins will require a license
- D. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
Answer: A
NEW QUESTION # 56
Which statement about the SY480 Gen10 Plus Compute Module is true?
- A. It only supports NVDIMM Persistent Memory.
- B. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
- C. It supports 8 memory channels and memory DIMMs of up to 256GB.
- D. It cannot be mixed with Gen9 compute modules in the same frame.
Answer: A
NEW QUESTION # 57
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?
- A. If vCenter Server is licensed in the HPE Oneview interface
- B. If HPE OneView credentials are added in vCenter Server
- C. If an compute nodes are added to the vCenter Server
- D. If the HPE Oneview instance Is integrated with HPE OV4VC.
Answer: C
NEW QUESTION # 58
Click the option that will allow you to change the ESXI image used In an OS Deployment Plan.
Answer:
Explanation:
NEW QUESTION # 59
......
HPE0-S60 Dumps PDF - HPE0-S60 Real Exam Questions Answers: https://www.dumpstillvalid.com/HPE0-S60-prep4sure-review.html
Realistic HPE0-S60 Dumps Latest Practice Tests Dumps: https://drive.google.com/open?id=1dJDdfQkY_WqV_8mzGnKnzZXFiPSdK70N
