Get HP HPE0-S60 Dumps Questions [2023] To Gain Brilliant Result
HPE0-S60 dumps - DumpStillValid - 100% Passing Guarantee
The HP HPE0-S60 Certification Exam is a Delta exam, which means that it is designed for individuals who already hold a HPE ATP or ASE certification. The Delta exam is intended to test the knowledge and skills of an individual in the areas that have changed since they last took the certification exam. The HP HPE0-S60 Delta exam is a 90-minute exam that consists of 40 multiple-choice questions. The exam is available in English, Japanese, and Simplified Chinese.
NEW QUESTION # 45
You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)
- A. Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy
- B. Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy
- C. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
- D. HPE Virtual Connect SE 32Gb FC Module for HPE Synergy
- E. HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy
- F. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
Answer: C,D
NEW QUESTION # 46
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
- B. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- C. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- D. This logical JBOD can be presented to the compute nodes in a different frame.
Answer: C
NEW QUESTION # 47
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?
- A. vSphere Standard license
- B. Load balancing cluster
- C. Virtual Distributed Switch
- D. Dedicated VMKernel port
Answer: D
NEW QUESTION # 48
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. Virtual Volume Set
- B. Storage Container
- C. App Volume Set
- D. virtual Volume
Answer: A
NEW QUESTION # 49
Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?
- A. A management ring can contain mixed frame link module configurations
- B. Existing 2-port FLM modules must be replaced with 4-port FLM modules
- C. Mixing different FLM modules is allowed if all of them have the same firmware version
- D. A management ring with mixed FLM modules cannot have more than 12 frames
Answer: D
NEW QUESTION # 50
Which statement about HPE Superdome Flex 280 is true?
- A. It can support up to two nPars with an external RMC.
- B. it cannot be managed using HPE OneView.
- C. It supports 2 to 8 sockets in 2-socket increments.
- D. It must be equipped with at least 768 GB of memory.
Answer: D
NEW QUESTION # 51
Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61 Which statement about this update process is true?
- A. Before updating to 6,1, customer should increase memory size on the HPE Composer.
- B. To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.
- C. The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.
- D. The customer can update directly to 6,1, but HPE OneView downtime will be longer.
Answer: C
NEW QUESTION # 52
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
- B. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- C. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
- D. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
Answer: B
NEW QUESTION # 53
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE ProLiant DL580 Gen10
- B. HPE Synergy 480 Gen10 Plus
- C. HPE Superdome Flex system
- D. HPE ProLiant OL380 Gen 10 Plus
Answer: B
NEW QUESTION # 54
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 55
What is a restriction of using a RoCE network?
- A. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- B. It is by default configured as an untagged network and cannot be a part of a network set.
- C. It does not support smart link and private network features.
- D. It does not support Private VLAN and Multicast VLAN.
Answer: B
NEW QUESTION # 56
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
- B. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
- C. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
- D. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
Answer: C
NEW QUESTION # 57
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- B. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- C. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
- D. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
Answer: A
NEW QUESTION # 58
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
- B. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
- C. Both HPE Synergy Gen10 full-height compute module plugins will require a license
- D. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
Answer: B
NEW QUESTION # 59
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
Answer:
Explanation:
NEW QUESTION # 60
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?
- A. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
- B. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
- C. All logical interconnects configured using this logical Interconnect group will report inconsistency
- D. All logical interconnects configured using this logical interconnect group will be automatically updated
Answer: A
NEW QUESTION # 61
......
By earning the HPE0-S60 certification, IT professionals can demonstrate their expertise in the latest HPE compute solutions and prove their ability to leverage the latest technologies to deliver business value. This certification validates their skills in designing, deploying, managing, and troubleshooting HPE compute solutions based on HPE ProLiant Gen10 technology, which is a critical skillset for IT professionals who work in data center environments. With this certification, IT professionals can differentiate themselves in the job market and open doors to new career opportunities.
The HP HPE0-S60 (Delta - HPE Compute Solutions) certification exam is intended for IT professionals who have already earned the HPE ATP - Server Solutions V3 or HPE ATP - Server Solutions V4 certification. This exam is designed to test the candidate's knowledge of the latest HPE compute solutions, including HPE ProLiant Gen10, HPE SimpliVity, HPE Synergy, and HPE OneView. Passing this exam is essential for IT professionals who want to demonstrate their expertise in HPE compute solutions and advance their careers. The certification is recognized globally and is highly valued by organizations seeking IT professionals who are knowledgeable in HPE compute solutions.
Get 100% Passing Success With True HPE0-S60 Exam: https://www.dumpstillvalid.com/HPE0-S60-prep4sure-review.html
Premium Quality HP HPE0-S60 Online dumps: https://drive.google.com/open?id=1dJDdfQkY_WqV_8mzGnKnzZXFiPSdK70N
