Best Quality Juniper JN0-682 Exam Questions DumpStillValid Realistic Practice Exams [2024]
Critical Information To Data Center, Professional (JNCIP-DC) Pass the First Time
The JN0-682 exam covers a wide range of topics related to data center design, implementation, and troubleshooting. JN0-682 exam tests candidates' knowledge of data center architectures, virtualization technologies, storage solutions, and network security. Candidates are also expected to have a solid understanding of Juniper Networks' data center products and how to configure and manage them.
NEW QUESTION # 37
Referring to the exhibit, you have a data center with two PODs. Seamless EVPN-VXLAN stitching is used to facilitate communication between the PODs.
Which three statements are true in this scenario? (Choose three.)
- A. AVXLAN tunnel can form between L1 and L4.
- B. AVXLAN tunnel can form between L2 and S1.
- C. A VXLAN tunnel can form between S1 and S2.
- D. AVXLAN tunnel can form between L1 and L2.
- E. AVXLAN tunnel can form between L2 and S3.
Answer: B,C,E
NEW QUESTION # 38
Referring to the exhibit, DC1 and DC2 have a DCI across a service provider WAN connection.
Host1 in DC1 must have Layer 2 connectivity to host2 in DC2. A VXLAN tunnel must be created between VTEP1 and VTEP2.
In this scenario, which statement is true?
- A. VXLAN Layer 3 gateway must be provisioned at the Super Spine layer.
- B. VTEP and VTEP2 must peer using IBGP.
- C. The service provider WAN connection be an MPL5-based WAN connection.
- D. A route to the loopback address on VTEP must be present on VTEP1.
Answer: D
NEW QUESTION # 39
You are asked to deploy an Ethernet bridging design in a data center with the following criteria:
- routing must occur on the leaf devices.
- VTEPs must terminate on the leaf devices.
- facilitate inter-VLAN communication.
- lower latency with East-West traffic.
Which architecture should you use in this scenario?
- A. bridge overlay architecture
- B. centrally-routed bridging architecture
- C. collapsed spine architecture
- D. edge-routed bridging architecture
Answer: D
NEW QUESTION # 40
You are building an IP fabric underlay for your data center. You are asked to ensure that the two spine devices are in the same AS (65000) while the six leaf devices are in a different AS (65512).
In this scenario, which two statements are correct by default? (Choose two.)
- A. A leaf device will accept all BGP routes received from the spine that were originated from another leaf device.
- B. All BGP routes advertised by a leaf device will be rejected on the spine devices.
- C. All BGP routes advertised by a leaf device will be accepted on the spine devices.
- D. A leaf device will reject all BGP routes received from the spine that were originated from another leaf device.
Answer: B,C
NEW QUESTION # 41
Exhibit.
You are attempting to configure filter-based forwarding in your data center. All traffic from Host1 that is going to Host2 should be inspected by the data center firewall. You have verified that the traffic is being forwarded from router leaf L1's VRF-1 to its INSPECT-VRF. however, the traffic is not reaching service L2.
Referring to the exhibit, which two steps should you take to troubleshoot the problem? (choose two.)
- A. Ensure that the route target in the INSPECT-VRF of L1 matches the route target of the INSPECT-VRF of L2.
- B. Examine the INSPECT-VRF.inet. 0 route table on L1 for a default route that will direct the traffic to L2.
- C. Examine the INSPECT-VRF.evpn 0 route table on L1 for a default route that will direct the traffic to L2.
- D. Ensure that VRF-1 and INSPECT-VRF route targets on L1 and L2 match.
Answer: A
NEW QUESTION # 42
You are troubleshooting a problem with traffic not reaching a remote VTEP. Referring to the exhibit, what is the reason for the problem?
- A. No VTEP is configured on peer 192.0.2.20.
- B. The local VTEP is misconfigured with the wrong VNI.
- C. A conflict exists with the VLAN-to-VNI mapping.
- D. The remote VTEP does not have the correct VNI configured.
Answer: D
NEW QUESTION # 43
Referring to the exhibit,
what effect does EVPN core isolation have?
- A. Spine 1 will block all traffic.
- B. Leaf 1 will place the interfaces to connected hosts into LACP passive mode.
- C. Leaf 1 will send a pause frame to each connected host.
- D. Leaf 1 will take down all revenue interfaces.
Answer: D
NEW QUESTION # 44
You have deployed a VXLAN as shown in the exhibit Leaf1, leaf3, spine1, and spine2 have been configured as VTEPs. Host1 cannot communicate with host2.
Referring to the exhibit, how would you solve this problem?
- A. The VLAN ID on the connected to host2 must be changed to VLAN 100
- B. Host1 and host2 must be placed in the same VRF
- C. A layer 3 VXLAN gateway must be configured on at least on at least one of the devices
- D. A DCI connected must be created between the VLANs
Answer: C
NEW QUESTION # 45
You have configured MP-IBGP to support EVPN for your overlay network. However, you are not seeing the
expected routes on your edge devices.
Referring to the exhibit, how would you solve this problem?
- A. The family evpn signaling parameter must be configured on the remote peer.
- B. The group types on both devices should be set to external
- C. Graceful restart must be disabled for this session
- D. The family 12vpn signaling must be configured on the local peer
Answer: A
NEW QUESTION # 46
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Switch01 is a leaf device.
- B. Switch01 is a spine device.
- C. Seamless EVPN VXLAN stitching is in use.
- D. An OTT data center interconnect is in use.
Answer: A,C
NEW QUESTION # 47
You have configured MP-IBGP to support EVPN for your overlay network. However, you are not seeing the expected routes on your edge devices.
Referring to the exhibit, how would you solve this problem?
- A. The family evpn signaling parameter must be configured on the remote peer.
- B. The group types on both devices should be set to external
- C. Graceful restart must be disabled for this session
- D. The family 12vpn signaling must be configured on the local peer
Answer: A
NEW QUESTION # 48
You are configuring a DCI VPN solution between sites that require an L3VPN to work with your EVPN deployment. Your organization's policy restricts configuring RSVP and LDP on your WAN links. While configuring the solution, you notice that no routes exist in the inet table.
In this scenario, which parameter will solve this problem?
- A. bgp family inet labeled-unicast per-group-label
- B. bgp family inet labeled-unicast aggregate-label
- C. bgp family evpn signaling
- D. bgp family inet labeled-unicast resolve-vpn
Answer: C
NEW QUESTION # 49
You are asked to configure VXLAN for you c data center using multicast to exchange VTEP information?
In this scenario, which two configuration parameters must match on the VTEPs in the same VXLAN segment?
(Choose two.)
- A. VLAN ID
- B. Routing instance name
- C. Multicast group
- D. VNI
Answer: C,D
NEW QUESTION # 50
Which statement is true about the route shown in the exhibit?
- A. The route uses a type-1 route distinguisher.
- B. The VNI for this route is 304.
- C. The route is an EVPN type-1 route.
- D. The route target on this route is 1000
Answer: B
NEW QUESTION # 51
Which two statements are true about VRF routing instances? (Choose two.)
- A. VRF does not enable multitenancy.
- B. VRF can be used in conjunction with Layer 3 logical interfaces.
- C. Each logical Layer 3 interface can belong to multiple routing instances.
- D. Each logical Layer 3 interface can belong to only one routing instance.
Answer: B,D
NEW QUESTION # 52
Your colleague has begun working on the base configuration for an active-active multihomed EVPN connection shown in the exhibit.
Which two actions will ensure a successful implementation? (Choose two.)
- A. Change the ESI value on the PE1 device to 00.22.44.88.00.22.44.66.88
- B. Change the ESI mode on PE1 to signal-active
- C. Change the ESI mode on PE2 to all-active
- D. Change the ESI value on the PE2 device to 00.00.00.00.00.00.00.00.00.00
Answer: A,C
NEW QUESTION # 53
What are two streaming data formats supported for network analytics? (Choose two.)
- A. GPB
- B. XML
- C. SLAX
- D. JSON
Answer: A,D
NEW QUESTION # 54
The configuration shown in the exhibit is intended to set up assisted replication but will not commit. Which action will create a valid configuration in this situation?
- A. Delete replicator inet 192.168.100.1.
- B. Change the replicator inet address to 192.168.100.101.
- C. Change the replicator inet address to 192.168.100. 51.
- D. Change the 10.0 address to 192.168.100.1 primary.
Answer: B
NEW QUESTION # 55
Your manager asks you to secure ARP and DHCP traffic across your local Ethernet links
In this scenario, which technology will accomplish this task?
- A. MAC sec
- B. A firewall filter
- C. SSL
- D. IPsec
Answer: A
NEW QUESTION # 56
Exhibit.
Site 1 contains 20+ VMs. The link between Site 1 and Leaf1 goes down.
Referring to the exhibit, which statement is correct?
- A. Type-1 routes for each VM will be withdrawn one at a time.
- B. Type-1 routes for all VMs in the site will be withdrawn all at once.
- C. Type-1 routes for all VMs in the site will expire all at once.
- D. Type-1 routes for each VM will expire one at a time.
Answer: B
NEW QUESTION # 57
You are evaluating which method to use for learning MAC addresses in your VXLAN network. Which statement is true in this scenario?
- A. Multicast exchanges MAC addresses through control plane learning and is not more reliable than EVPN.
- B. Multicast exchanges MAC addresses through data plane learning and is more reliable than EVPN.
- C. EVPN exchanges MAC addresses through control plane learning and is more reliable than multicast.
- D. EVPN exchanges MAC addresses through data plane learning and is more reliable than multicast.
Answer: C
NEW QUESTION # 58
Exhibit.
Site 1 contains 20+ VMs. The link between Site 1 and Leaf1 goes down.
Referring to the exhibit, which statement is correct?
- A. Type-1 routes for all VMs in the site will be withdrawn all at once.
- B. Type-1 routes for all VMs in the site will expire all at once.
- C. Type-1 routes for each VM will be withdrawn one at a time.
- D. Type-1 routes for each VM will expire one at a time.
Answer: C
NEW QUESTION # 59
......
JN0-682 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.dumpstillvalid.com/JN0-682-prep4sure-review.html
Best Quality Juniper JN0-682 Exam Questions: https://drive.google.com/open?id=1QkvJS2YCIcY0lxrY-_ikxfhD1hVjinEB
