HPE2-T37 Exam Brain Dumps - Study Notes and Theory [Nov-2021]
100% Guaranteed Results HPE2-T37 Unlimited 41 Questions
NEW QUESTION 14
Which statement about a server profile for an Apollo system is true?
- A. Virtual WWNs and MAC addresses can be defined
- B. UEFI optimized is the only available boot mode
- C. Fibre Channel connections can be defined
- D. Enclosure Group Is automatically selected
Answer: A
NEW QUESTION 15
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?
- A. A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
- B. A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.
- C. A logical enclosure is created automatically, and it is always based on a single enclosure.
- D. A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.
Answer: C
NEW QUESTION 16
Which HPE components can be managed using HPE Composer? (select two.)
- A. HPE Synergy Virtual Connect SE 32Gb FC Module
- B. HPE MSA 2062 Storage Array
- C. HPE B-series SN6600B Fibre Channel Switch
- D. HPE Synergy 480 Compute Modules
- E. HPE Superdome Flex 280
Answer: A,C
NEW QUESTION 17
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?
- A. As an application running on the server with Windows system.
- B. As an application running on the server with CentOS Linux system
- C. As a virtual appliance running on the supported hypervisor.
- D. As a physical appliance based on HPE ProLiant 360 Gen 10.
Answer: D
NEW QUESTION 18
What is a network set?
- A. It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.
- B. It is a collection of all networks configured within HPE OneView regardless of network type.
- C. It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.
- D. It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.
Answer: D
NEW QUESTION 19
After replacing a failed Compute Module, you notice the server profile Is not automatically assigned to the replaced server hardware. What can cause this issue?
- A. Server profile affinity is configured to Device Day + server hardware.
- B. IL0 firmware of the replacement server is different than firmware in broken server.
- C. The enclosure group has to be updated to match the original enclosure group.
- D. The replacement server has more memory or CPUs than broken machine.
Answer: B
NEW QUESTION 20
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The firmware repository service must be restarted using maintenance connection.
- B. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- C. The firmware repository is not defined within firmware compliance report.
- D. All of the components are up to date and compliant with firmware baseline.
Answer: A
NEW QUESTION 21
Which statement about M-LAG setup is true?
- A. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.
- B. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.
- C. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.
- D. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.
Answer: A
NEW QUESTION 22
Your customer added HPE Primera to HPE OneVlew and enabled volume provisioning on all storage pools.
For security reasons, the customer wants to disable volume provisioning using HPE OneView on a specific storage pool.
How can this task be completed?
- A. The storage pool should be marked as read-only using HPE OneView.
- B. The storage pool should be disabled using the array management tool.
- C. The storage pool should be removed from HPE OneView using a PowerShell script.
- D. The storage pool state should be changed to discovered using HPE OneView.
Answer: B
NEW QUESTION 23
A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?
- A. Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.
- B. An existing volume can be replicated automatically when creating a server profile.
- C. Boot volumes can be created on demand and defined in the server profile template.
- D. single SAN volume can be created and utilized by all HPE Synergy Compute Modules.
Answer: C
NEW QUESTION 24
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?
- A. whether array management using HPE OneView is enabled in SSMC.
- B. whether the appropriate license for HPE Primera Is available in HPE OneView.
- C. whether WSAPI service is enabled on HPE Primera array.
- D. whether there are at least two Fibre Channel networks defined in HPE OneView.
Answer: C
NEW QUESTION 25
What is the best practice when deploying an HPE OneView appliance?
- A. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
- B. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
- C. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
- D. Deploy two HPE OneView appliances and configure them in HA mode.
Answer: B
NEW QUESTION 26
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
- B. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than
10 Compute Modules are installed in the frame. - C. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
- D. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
Answer: B
NEW QUESTION 27
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. For FC uplink sets, an additional uplink from second module should be added for redundancy.
- B. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- C. The maximum supported number of the internal networks for logical interconnect is configured.
- D. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
Answer: D
NEW QUESTION 28
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are not added to the Logical Interconnect Group configuration.
- B. The other networks are configured with a purpose other than General or Management.
- C. The other networks have Private Network' selected, which hides them from Compute Modules.
- D. The other networks are not configured with the required Smart Link parameter.
Answer: C
NEW QUESTION 29
......
HPE2-T37 Dumps PDF - Want To Pass HPE2-T37 Fast: https://www.dumpstillvalid.com/HPE2-T37-prep4sure-review.html
HPE2-T37 Practice Exam Dumps Exam: https://drive.google.com/open?id=1G779ejosbyoM-5E45EOmeDkymlz4F1W1
