New (2022) HP HPE2-T37 Exam Dumps
Best Way To Study For HP HPE2-T37 Exam Brilliant HPE2-T37 Exam Questions PDF
HP HPE2-T37 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION 41
You try to add a new connection within a server profile, but an operation fails when you try to commit the changes.
What is a possible reason?
- A. The server is powered off
- B. The server is powered on
- C. The server does not have an HPE OneView license applied
- D. You tried to add additional connection above the limit
Answer: B
NEW QUESTION 42
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Server Profile
- B. Logical Enclosure
- C. Logical Interconnect Group
- D. Logical Interconnect
Answer: A
NEW QUESTION 43
Which HPE components can be managed using HPE Composer? (select two.)
- A. HPE Synergy Virtual Connect SE 32Gb FC Module
- B. HPE MSA 2062 Storage Array
- C. HPE B-series SN6600B Fibre Channel Switch
- D. HPE Synergy 480 Compute Modules
- E. HPE Superdome Flex 280
Answer: A,C
NEW QUESTION 44
Where is the association between an HPE OneView network and uplink port defined?
- A. At the network set level
- B. Within an Enclosure Group definition
- C. Within an HPE OneView network definition
- D. At the Logical Interconnect Group level
Answer: D
NEW QUESTION 45
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION 46
Which components require an HPE OneView license for management?
- A. HPE Apollo XL 170r
- B. Brocade and Cisco SAN Manager
- C. HPE Primera and HPE 3PAR
- D. HPE Virtual Connect modules
Answer: D
NEW QUESTION 47
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
- B. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
- C. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
- D. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than
10 Compute Modules are installed in the frame.
Answer: D
NEW QUESTION 48
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- B. HPE OneView Global Dashboard allows server profile replication and change management.
- C. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- D. PowerShell Library for HPE OneView allows scripted environment modification.
Answer: D
NEW QUESTION 49
What is required to add remote frame link topology to HPE OneView?
- A. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- B. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
- C. Management ports of the remote frame link topology must be connected to the management LAN.
- D. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
Answer: A
NEW QUESTION 50
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Firmware deployment support dump
- B. Enclosure group support dump
- C. Appliance support dump
- D. Logical enclosure support dump
- E. Maintenance console support dump
Answer: D,E
NEW QUESTION 51
Which statement about managing an HPE BiaoeSystem sever is true?
- A. Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE Oneview for monitoring
- B. An HPE server blade can be removed trom HPE OneView by deleting the server from the Server Hardware section
- C. A muiti-enclosure Vrtuai Connect domain can be imported to HPE OneView without disrupting servers
- D. An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure
Answer: B
NEW QUESTION 52
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. HPE OneView was restored from a backup that created inconsistency with the server profile template.
- B. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- C. Changes to the server profile were implemented directly on the server profile.
- D. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
Answer: B
NEW QUESTION 53
Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?
- A. BIOS management
- B. Workload profile
- C. Secure boot
- D. Boot from SAN
Answer: D
NEW QUESTION 54
Which statement about M-LAG setup is true?
- A. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.
- B. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.
- C. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.
- D. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.
Answer: C
NEW QUESTION 55
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks have Private Network' selected, which hides them from Compute Modules.
- B. The other networks are configured with a purpose other than General or Management.
- C. The other networks are not configured with the required Smart Link parameter.
- D. The other networks are not added to the Logical Interconnect Group configuration.
Answer: D
NEW QUESTION 56
what is required to add a remote frame to the primary management ring?
- A. UUD of the remote HPE Composer
- B. Request code from the primary HPE Composer
- C. Remote frame Link Module IPv6 address
- D. Serial number of one of the remote frames
Answer: B
NEW QUESTION 57
You plan to update HPE OneVew to the latest version
What Should you do Mora starting HPE OneView update?
- A. Put all servers managed through HPE OneView to maintenance state
- B. Disable HPE Remote Support at toe HPE OneView appliance level
- C. Run the Update Readiness checker tool to evaluate HPE OneView health status
- D. Create a support dump for the appliance and for all managed logical interconnects
Answer: C
NEW QUESTION 58
Which action is allowed on storage pools managed by HPE OneView?
- A. Setting storage pool replication
- B. Volume provisioning
- C. Changing storage pool capacity
- D. Changing storage pool RAID level
Answer: C
NEW QUESTION 59
You need to make sure that server ports connected to this network cannot communicate with each other within the logical interconnect. Click the option within the network definition that will allow you to configure the required parameter.
Answer:
Explanation:
NEW QUESTION 60
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- B. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- C. HPE OneView Global Dashboard allows server profile replication and change management.
- D. PowerShell Library for HPE OneView allows scripted environment modification.
Answer: A
NEW QUESTION 61
Your customer wants to manage their HPE Superdome Flex using HPE OneView.
Which component must be added to HPE OneView to accomplish this task?
- A. Baseboard Management Controller (BMC)
- B. all nPARs created within the complex
- C. only the base chassis from the complex
- D. Rack Management Controller (RMC)
Answer: A
NEW QUESTION 62
You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.
Click the appropriate configuration option.
Answer:
Explanation:
NEW QUESTION 63
......
Updated Verified Pass HPE2-T37 Exam - Real Questions and Answers: https://www.dumpstillvalid.com/HPE2-T37-prep4sure-review.html
Dumps Moneyack Guarantee - HPE2-T37 Dumps Approved Dumps: https://drive.google.com/open?id=1ncEU8x39GHgKzPv_VVOQVlDvnzs2SIRh
