Use D-VXR-OE-23 Exam Dumps (2024 PDF Dumps) To Have Reliable D-VXR-OE-23 Test Engine
D-VXR-OE-23 PDF Recently Updated Questions Dumps to Improve Exam Score
EMC D-VXR-OE-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 12
When the VxRail cluster is deployed, what vSAN storage policy settings are applied to the VxRail Manager VIVP
- A. Failures to Tolerate: 1 failure - RAID 1 (Mirroring) Object space reservation. Thick provisioning
- B. Failures to Tolerate: 1 failure - RAID 5 (Erasure Coding) Object space reservation Thick provisioning
- C. Failures to Tolerate: 1 failure - RAID 5 (Erasure Coding) Object space reservation. Thin provisioning
- D. Failures to Tolerate: 1 failure - RAID 1 (Mirroring) Object space reservation: Thin provisioning
Answer: D
Explanation:
When the VxRail cluster is deployed, the vSAN storage policy settings applied to the VxRail Manager VM are as follows:
Failures to Tolerate: 1 failure - RAID 1 (Mirroring)
Object space reservation: Thin provisioning
These settings ensure that the VxRail Manager VM has redundancy to tolerate a single failure and uses thin provisioning to optimize storage usage.
Reference:
Dell VxRail Deployment Guide: VxRail Deployment Guide
NEW QUESTION # 13
SIMULATION
A VxRail administrator is concerned about security and wants to protect the vSAN storage against unauthorized access (for both data on disk and in flight.) Use the simulator to enable the relevant services. A vSphere Native Key Provider has already been configured.
Answer:
Explanation:
See the step by step solution in the Explanation below
Explanation:
To protect the vSAN storage against unauthorized access for both data on disk and in-flight, enable vSAN data-at-rest encryption and data-in-transit encryption. Follow these steps:
Log in to vSphere Client:
Open the vSphere Client.
Enter the username: [email protected].
Enter the password: VMw@r3!123.
Click Login.
Navigate to vSAN Cluster Settings:
In the left-hand navigation pane, expand VxRail-DC and select VxRail-Cluster.
Click on the Configure tab.
Enable vSAN Data-at-Rest Encryption:
Under the vSAN section, select Services.
Click on Data-at-Rest Encryption.
Click Edit to configure encryption settings.
Ensure that the Enable Data-at-Rest Encryption checkbox is selected.
Choose the vSphere Native Key Provider that has already been configured.
Click Apply to enable data-at-rest encryption.
Enable vSAN Data-in-Transit Encryption:
Under the same vSAN section, select Services.
Click on Data-in-Transit Encryption.
Click Edit to configure encryption settings.
Ensure that the Enable Data-in-Transit Encryption checkbox is selected.
Click Apply to enable data-in-transit encryption.
Verify Configuration:
Return to the vSAN > Services section.
Ensure that both Data-at-Rest Encryption and Data-in-Transit Encryption are enabled and show as active.
Verify that there are no error messages indicating configuration issues.
Steps using the Simulator:
Login to vSphere Client:
Open the simulator and navigate to the vSphere Client interface.
Log in using the credentials:
Username: [email protected].
Password: VMw@r3!123.
Navigate to vSAN Settings:
In the vSphere Client interface, expand VxRail-DC and select VxRail-Cluster.
Click on the Configure tab on the right.
Enable Data-at-Rest Encryption:
Under vSAN, click Services.
Find Data-at-Rest Encryption and click Edit.
Check the box for Enable Data-at-Rest Encryption.
Select the vSphere Native Key Provider.
Click Apply.
Enable Data-in-Transit Encryption:
Still under vSAN > Services, find Data-in-Transit Encryption and click Edit.
Check the box for Enable Data-in-Transit Encryption.
Click Apply.
Verification:
Check the status of both encryption services under vSAN > Services to ensure they are enabled and operational.
Reference:
VMware vSAN Security Guide: vSAN Security
By enabling both data-at-rest and data-in-transit encryption, you can protect the vSAN storage from unauthorized access and ensure data security both on disk and during transit.
NEW QUESTION # 14
Which three processes are performed during a VxRail cluster shutdown? (Select 3)
- A. vSphere DRS is disabled.
- B. Health monitoring is enabled.
- C. Client VMs are shut down.
- D. vSphere HA is disabled.
- E. Service VMs are migrated.
Answer: B,D,E
NEW QUESTION # 15
Which VxRail Manager view displays the storage IOPS, CPU, memory, and storage usage at the VxRail cluster level?
- A. Health > Physical
- B. health > Logical
- C. Config > System
- D. Dashboard
Answer: B
NEW QUESTION # 16
At what object levels are vSAN performance information available?
- A. Host, VM, and Process
- B. Host, VM, and Application
- C. Cluster, VM, and Application
- D. Cluster, Host, and VM
Answer: D
NEW QUESTION # 17
A VxRail administrator has configured a VxRail stretch cluster with the default distributed virtual switch networks.
Which network is missing?
- A. Virtual SAN network
- B. vSphere vMotion network
- C. Management network
- D. Stretch network
Answer: D
NEW QUESTION # 18
Where are the VxRail Manager backup files located after they are created?
- A. vSAN Datastore
- B. VxRail Manager VM Backup Folder
- C. Local Datastore
Answer: A
Explanation:
After VxRail Manager backup files are created, they are located on the vSAN Datastore. This ensures that the backup files are stored within the same resilient storage infrastructure as the other critical data, providing redundancy and high availability.
Reference:
Dell VxRail Manager User Guide: VxRail Manager User Guide
NEW QUESTION # 19
Which authentication method is used in VxRail API?
- A. OAuth
- B. SAML
- C. PSC SSO
- D. JSON Web Token
Answer: C
NEW QUESTION # 20
What is the VxRail evaluation period for vSphere and vSAN?
- A. 90 days
- B. 60 days
- C. 30 days
- D. 120 days
Answer: B
NEW QUESTION # 21
A VxRail administrator needs to add storage capacity to a 4-node VxRail E Series cluster. Each node currently has one cache and four capacity disks.
What does the administrator need to order, per node, to fully populate the available disk slots?
- A. 1 capacity disk
- B. 5 capacity disks
- C. 1 cache and 5 capacity disks
- D. 1 cache and 4 capacity disks
Answer: D
NEW QUESTION # 22
What functionality does the iDRAC provide for VxRail nodes?
- A. Firmware updates
- B. vSAN Configuration
- C. Virtual Machine Management
- D. Network Management
Answer: A
NEW QUESTION # 23
During a maintenance task on a VxRail Appliance, the system LED on vcluster730-esx03.edu.local is required to be enabled so the node can be correctly identified in the physical rack.
Use the simulator to enable the System LED for the node.
Answer:
Explanation:
To enable the system LED onvcluster730-esx03.edu.localfor identification in the physical rack, follow these steps:
* Log in to vSphere Client:
* Open the vSphere Client.
* Enter the username:[email protected].
* Enter the password:VMw@r3!123.
* ClickLogin.
* Navigate to the Host:
* In the vSphere Client interface, navigate to theHosts and Clustersview.
* Expand theVxRail-DCand then theVxRail-Cluster.
* Select the host namedvcluster730-esx03.edu.local.
* Access Host Actions:
* Right-click onvcluster730-esx03.edu.local.
* From the context menu, selectActions.
* Enable System LED:
* In the Actions menu, locate and selectEnable LEDorTurn On Locator LED(the exact wording might vary).
* Confirm the action if prompted.
* Verify LED Activation:
* Check the physical rack to ensure that the system LED onvcluster730-esx03.edu.localis enabled and the node is easily identifiable.
Reference:
VMware vSphere Host Management Guide: vSphere Host Management
=========================
Note: The exact steps to enable the LED might vary slightly based on the version of vSphere Client you are using, but the general process involves selecting the host and using the Actions menu to enable the system LED.
NEW QUESTION # 24
A VxRail administrator is concerned that the NDC is a single point of failure on your VxRail nodes.
What can be done to increase redundancy in this scenario?
- A. Spread network traffic across two NDC
- B. Spread network traffic across two ports on a PCIe adapter
- C. Spread network traffic across other nodes in the cluster
- D. Spread network traffic across NDC and PCIe adapter ports
Answer: D
NEW QUESTION # 25
What is the minimum number of nodes needed for self-healing after a failure with a vSAN storage policy of FTT = 1 and FTM = Mirroring?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 26
What is a consideration when using a VxRail Cluster with vSphere Standard Edition licensing?
- A. Workload balancing is automated
- B. Administrative workload is decreased
- C. vGPU is not supported
- D. Drive replacement is streamlined
Answer: B
NEW QUESTION # 27
A user has three G Series nodes in a VxRail cluster. They are planning to add five additional G Series nodes.
How much additional rack is required to accommodate the new nodes?
- A. 2U
- B. 1U
- C. 5U
- D. 10U
Answer: A
NEW QUESTION # 28
What is the sequence of steps to deploy a second VDS for VxRail network traffic?
- A. 1. Create port groups on the new VDS for the VxRail networks that must be migrated.
2. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports.
3. Cable VxRail NIC ports to ToR switches.
4. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel adapters.
5. Create a VDS with the required number of uplinks. - B. 1. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports.
2. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel adapters.
3. Create port groups on the new VDS for the VxRail networks that must be migrated.
4. Cable VxRail NIC ports to ToR switches.
5. Create a VDS with the required number of uplinks. - C. 1. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel adapters.
2. Create a VDS with the required number of uplinks.
3. Cable VxRail NIC ports to ToR switches.
4. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports.
5. Create port groups on the new VDS for the VxRail networks that must be migrated. - D. 1. Create a VDS with the required number of uplinks.
2. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel adapters.
3. Cable VxRail NIC ports to ToR switches.
4. Create port groups on the new VDS for the VxRail networks that must be migrated.
5. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports.
Answer: A
NEW QUESTION # 29
An administrator wants to perform maintenance on a VxRail system.
Which configuration should be used for the VxRail Cluster Health Monitoring before starting the maintenance activity?
- A. Maintenance mode
- B. Disabled
- C. Suspended
- D. Enabled
Answer: A
NEW QUESTION # 30
Which command is used to unlock the mystic account on the VxRail Manager VM?
- A. pam_tally2 --user=mystic --reset
- B. reset-password -user mystic
- C. passwd --user mystic --reset
- D. reset-lockout -user=mystic
Answer: A
Explanation:
To unlock the mystic account on the VxRail Manager VM, the command used is pam_tally2 --user=mystic --reset. This command resets the failed login attempts counter for the specified user, unlocking the account if it was locked due to too many failed login attempts.
Steps to unlock:
Access the VxRail Manager VM through SSH.
Execute the command pam_tally2 --user=mystic --reset.
Verify that the account is unlocked and can log in successfully.
NEW QUESTION # 31
What is a benefit when using VCF on VxRail architectures'?
- A. Optimized infrastructure performance
- B. Automation of full stack lifecycle management
- C. Minimizes the risk from new deployments and operations
- D. Simplified deployment and lifecycle management
Answer: B
Explanation:
A significant benefit when using VCF (VMware Cloud Foundation) on VxRail architectures is the automation of full stack lifecycle management. VCF on VxRail integrates VMware Cloud Foundation with Dell EMC VxRail, providing an automated and turnkey hybrid cloud solution. This integration automates the deployment, configuration, and ongoing management of the entire stack, including hardware, virtualization, and cloud management, thereby reducing complexity and administrative overhead.
Reference:
Dell VCF on VxRail Overview: VCF on VxRail Overview
NEW QUESTION # 32
......
D-VXR-OE-23 Dumps Full Questions with Free PDF Questions to Pass: https://www.dumpstillvalid.com/D-VXR-OE-23-prep4sure-review.html
Free Dell Hyperconverged Infrastructure D-VXR-OE-23 Official Cert Guide PDF Download: https://drive.google.com/open?id=1zyulRTarl5dvmfRqCAOwiyHucqRESVFI
