Pass Your C_IBP_2211 Dumps as PDF Updated on 2023 With 80 Questions
SAP C_IBP_2211 Real Exam Questions and Answers FREE
To prepare for the SAP C-IBP-2211 exam, candidates should have experience working with SAP IBP for Supply Chain and be familiar with the different modules of the system. C_IBP_2211 exam consists of 80 multiple-choice questions, and candidates have 180 minutes to complete it. A passing score of 64% is required to earn the SAP Certified Application Associate - SAP IBP for Supply Chain (2211) certification.
SAP C_IBP_2211 Certification Exam is an essential step for professionals who want to prove their proficiency in SAP IBP for Supply Chain. SAP Certified Application Associate - SAP IBP for Supply Chain (2211) certification demonstrates the candidate's expertise in implementing and configuring SAP IBP solutions and validates their skills in delivering successful SAP IBP projects. SAP Certified Application Associate - SAP IBP for Supply Chain (2211) certification also helps professionals to enhance their career prospects and increase their earning potential.
NEW QUESTION # 43
Safety Stock outputs from Multistage Inventory Optimization are sent to which of these processes?
Note: There are 2 correct answers to this question.
- A. Decoupling Points determination in SAP IBP for demand-driven replenishment
- B. Supply Heuristics in SAP IBP for sales and operations
- C. Demand Sensing with Gradient Boosting (Full)
- D. Charts creation in SAP Supply Chain Control Tower
Answer: B,C
NEW QUESTION # 44
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.
- A. Increase the use of incremental lot size beyond the frozen horizon.
- B. Avoid using telescopic time buckets.
- C. Keep the number of fairshare segments small.
- D. Split into multiple planning areas to support weekly vs. daily planning needs.
- E. Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.
Answer: B,D,E
NEW QUESTION # 45
You are starting a new implementation project for SAP IBP and are considering the possible system architecture.What are the possible approaches for setting up the system landscape?Note: There are 2 correct answers to this question.
- A. Set up a three-tier landscape using transport, starting from the development system to test and production.
- B. Create additional planning areas in the test system to support training needs.
- C. Create additional test planning areas in the production system to support cutover needs.
- D. Set up a two-tier landscape, and have the configuration of the development system regularly updated from the production system.
Answer: A,D
NEW QUESTION # 46
Using the import/export functionality means working with groups of items that are organized into collections.What is the best practice for managing collections?
- A. A planning area with the copy operators assigned must be bundled in one collection.
- B. Configuration items should be bundled in the collections based on the SAP IBP project stream.
- C. A planning area with its time profile must be bundled in one collection.
- D. You should delete collections after they have been transported.
Answer: A,C
NEW QUESTION # 47
Why would you set up a cascading filter in the planning view?Note: There are 2 correct answers to this question.
- A. To filter attributes based on other attribute filters
- B. To filter data in an Application Job template
- C. To filter using attributes that have a large number of values
- D. To filter attributes based on specific values
Answer: C,D
NEW QUESTION # 48
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note:
There are 3 correct answers to this question.
- A. These filters can be used together with attribute totals in the same planning view.
- B. You can add (or delete) planning objects to a planning view after these filters are applied.
- C. These filters are always applied based on the values stored in the database.
- D. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- E. You can only apply one value-based filter per planning view.
Answer: C,D,E
NEW QUESTION # 49
Which features apply to quota violations modeled with the optimizer?
- A. Quotas can be modeled for sourcing location, production, and consensus demand.
- B. The optimizer will only violate quotas if quotas are maintained as time-dependent key figures.
- C. Min and Max Quotas have to be the same as sourcing ratios.
- D. Because quota violations shouldn't be possible, the non-delivery cost rate is less than quota violation cost.
Answer: D
NEW QUESTION # 50
Which functional capabilities are included in SAP IBP for response and supply?Note: There are 2 correct answers to this question.
- A. Planning with Product Allocations
- B. Analyze Supply Usage
- C. Gating Factors
- D. Detailed Production Scheduling
Answer: B,C
NEW QUESTION # 51
What are some of the prerequisites for configuring a planning area that results in a successful consistency check?Note: There are 2 correct answers to this question.
- A. Configure at least one calculated key figure for the planning area.
- B. Configure at most two input key figures on the same planning level in a key figure calculation.
- C. Assign the compound master data type and its component master data types.
- D. Specify a planning horizon in the planning area for each level of the assigned time profile.
Answer: C,D
NEW QUESTION # 52
SAP IBP ensures interoperability with which applications?Note: There are 2 correct answers to this question.
- A. User management in SAP Success Factors
- B. Salesforce Sales Cloud
- C. Financial Planning in SAP Analytics Cloud
- D. Business Network in SAP Ariba
Answer: C,D
NEW QUESTION # 53
Which of the following key functions are supported by SAP IBP for sales and operations?Note: There are 2 correct answers to this question.
- A. Scenario analysis for operational supply planning
- B. Time series analysis
- C. Simple statistical forecast
- D. Multi-Level Supply Planning Heuristics
Answer: C,D
NEW QUESTION # 54
Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.
- A. Embedded, on-the-fly demand analytics
- B. Detailed statistical analysis of demand data using predictive analytics tools
- C. Demand sensing of demand data using predictive analytics tools
- D. Consideration of demand-driven analysis for buffer positioning.
Answer: A,D
NEW QUESTION # 55
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.
- A. Adjusted transport receipts
- B. Minimum lot size
- C. Transportation lead times
- D. Maximum lot size
- E. Aggregated constraints
Answer: A,C,D
NEW QUESTION # 56
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note:
There are 2 correct answers to this question.
- A. The key figure is calculated and all editable.
- B. The key figure is stored and all editable.
- C. The key figure is stored and system editable.
- D. The key figure is calculated and system editable.
Answer: B,C
NEW QUESTION # 57
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results?Note: There are 2 correct answers to this question.
- A. The Business Meaning of the attribute has been specified.
- B. The attribute belongs to a simple or compound master data type.
- C. The attribute should be a non-key attribute of the master data type.
- D. The attribute should be assigned to all planning levels.
Answer: B,C
NEW QUESTION # 58
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?
- A. Created as type NVARCHAR and assigned to an external master data type
- B. Created as type DECIMAL and assigned to a compound master data type
- C. Created as type INTEGER and assigned to a simple master data type
- D. Created as type INTEGER and assigned to a compound master data type
Answer: B
NEW QUESTION # 59
How many different time levels can be selected within one planning view?
- A. All time levels available in the time profile
- B. Only base time levels of the planning area
- C. Only time levels from the base planning level of selected key figures
- D. All time levels available in the time profile, restricted by global configuration parameter
Answer: A
NEW QUESTION # 60
Which of the following are capabilities of the Manage Forecast Error Calculations - Inventory Optimization app?Note: There are 2 correct answers to this question.
- A. Adjust Safety Stock Recommendations based on forecast error CV input
- B. Identifiy intermittent demand for Forecast Error CV calculations
- C. Adjust for forecast bias in Forecast Error CV calculations
- D. Propagate forecast error to upstream locations in a supply chain network
Answer: A,C
NEW QUESTION # 61
Which type of Master Data will be represented by the Master Data Type LOCATIONFR?
- A. Reference Master Data Type
- B. Virtual Master Data Type
- C. Compound Master Data Type
- D. External Master Data Type
Answer: A
NEW QUESTION # 62
Which of the following data can be tracked using a change-history-enabled key figure?Note: There are 3 correct answers to this question.
- A. Attributes
- B. Scenario ID
- C. Modified date
- D. Key figure type
- E. Reason code
Answer: A,C,E
NEW QUESTION # 63
Which of the following conditions are relevant for subtotals in the planning view?Note: There are 2 correct answers to this question.
- A. The total number of attributes that can use subtotals in the planning view can be restricted.
- B. The total value can be added before or after the selected attribute.
- C. Only attribute-based totals can be added to the planning view.
- D. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
Answer: A,B
NEW QUESTION # 64
You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed?Note: There are 2 correct answers to this question.
- A. Push and Pull production models are used by the optimizer.
- B. Planning results can be generated faster by the optimizer.
- C. Prioritization of demand elements one by one is achieved by unconstrained heuristics.
- D. Finite heuristics can achieve demand prioritization and pegging.
Answer: A,D
NEW QUESTION # 65
Model configuration allows the attributes of a master data type to be assigned as key figures.Which features are relevant for this type of object?
- A. This object contains user-defined criteria that monitor the running of business plans.
- B. This object provides a single value for a unique planning combination.
- C. This object is not exposed to the user in planning views or modeling.
- D. This type of key figure is not usually stored and it cannot be set to editable.
Answer: B
NEW QUESTION # 66
What does ABC/XYZ segmentation allow you to do?Note: There are 2 correct answers to this question.
- A. Identify inventory items that require closer attention.
- B. Choose time-independent key figures as segmentation measures.
- C. Substitute missing values in case of sporadic demands.
- D. Use forecasting algorithms that are specific to seasonal demands of SKUs in the segment "B".
Answer: A,B
NEW QUESTION # 67
......
SAP C-IBP-2211 exam is a valuable certification for individuals who work with SAP IBP for Supply Chain and want to demonstrate their expertise in the system. By earning this certification, candidates can enhance their career prospects and contribute to the success of their organization by effectively implementing and maintaining SAP IBP for Supply Chain solutions.
Pass SAP C_IBP_2211 Exam Info and Free Practice Test: https://www.dumpstillvalid.com/C_IBP_2211-prep4sure-review.html
