[Nov 23, 2021] Valid 1Z0-1066-20 Test Answers & Oracle 1Z0-1066-20 Exam PDF
Realistic 1Z0-1066-20 Exam Dumps with Accurate & Updated Questions
NEW QUESTION 13
When analyzing demand fulfillment, what are the three types of recommendations that users can review and accept for expediting? (Choose three.)
- A. Expedite drop ship orders
- B. Expedite buy orders
- C. Expedite transfer orders
- D. Expedite make orders
- E. Expedite make to stock orders
Answer: B,C,D
NEW QUESTION 14
Which disaggregation methods are used for each of these measures: adjusted shipments forecast, target service level, and shipments forecast?
- A. Adjusted shipments forecast uses equal, target service level uses same value, and shipments forecast uses measure.
- B. Adjusted shipments forecast uses measure, target service level uses equal, and shipments forecast doesn't have any disaggregation method.
- C. Adjusted shipments forecast uses proportional, target service level uses same value, and shipments forecast uses measure.
- D. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast doesn't have any disaggregation method.
- E. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast uses self.
Answer: E
NEW QUESTION 15
As part of the agreement with one of your suppliers, you must always order product by the 100s. For example, if the required supply is 105, you must order 200, if it's 275, you must order 300. Which item attributes will help you achieve this?
- A. Rounding
- B. Fixed Order Quantity
- C. Maximum Order Quantity
- D. Fixed Lot Size Multiplier
- E. Minimum Order Quantity
Answer: D
NEW QUESTION 16
You have run a plan for your organization and there were sales orders that have been set up for drop shipment that you cannot see in the plan.
Which two options explain why the sales orders cannot be seen in the plan? (Choose two.)
- A. Supplier not configured in Manage Planning Source Systems
- B. Planning Profile 'Enable Planning for Drop Shipments' has not been set to 'Yes'.
- C. Drop Ship Item Validation Org has not been set up.
- D. Drop Ship Demand Class has not be set up.
- E. Include drop ship demands and supplies flag has not been checked on your plan options.
Answer: A,D
NEW QUESTION 17
Should value in Adjusted Shipments Forecast measure always be equal to the Final Shipments Forecast measure?
- A. Yes,if the demand plan hasn't been run again after adjustment.
- B. Yes, if the adjustment is made below the aggregation level at which it is viewed.
- C. Yes,if the adjustment is made at the same aggregation level at which itis viewed, or below.
- D. Yes,if the demand plan is approved and values are locked.
- E. No, both measures will always be different.
Answer: C
NEW QUESTION 18
Your customer has loaded shipment history of 1/1/14 through 12/31/16 and wants to generate a monthly forecast of 1/1/17 through 12/31/17 based on two-year shipment history.
When creating a demand plan, which two plan scopes and demand plan options should your customer use?
(Choose two.)
- A. For demand plan option, add forecast shipments as forecasting profile, enter historical buckets as 24, and enter forecast buckets as 12.
- B. For demand plan option, add forecast shipments as forecasting profile, enter history start date as
1/1/15, enter history end date as 12/31/15, and enter forecast start date as 1/1/17. - C. For plan scope, select plan horizon days as 365, forecasting calendar as Gregorian, and forecasting time level as month.
- D. For demand plan option, add forecast shipments as forecasting profile, enter history start date as
1/1/15, forecast start date as 1/1/17, and enter forecast end date as 12/31/17. - E. For plan scope, select plan horizon as 12 months, forecasting calendar as Gregorian, and forecasting time level as month.
- F. For demand plan option, add forecast shipments as forecasting profile, and enter historical buckets as 24.
Answer: A,C
Explanation:
NEW QUESTION 19
What is one method of associating a Safety Stock Quantity value to an item?
- A. Enter your value in the Safety Stock Quantity Override column in the Items page.
- B. Upload the value using File Based Data Import (FBDI)
- C. Run the Safety Stock Quantity Update Process.
- D. Enter your value in the Safety Stock Quantity column in the Items page.
Answer: D
NEW QUESTION 20
How can you deliver a forecast for drop shipments?
- A. Create based on the supplier performance for drop shipment collection
- B. It cannot be done at this time.
- C. Create based on the drop shipment or booking history; the ship from will be the drop ship validation organization
- D. Excel upload using File Based Data Import Process
- E. Generate manually using Planning Analytics
Answer: C
NEW QUESTION 21
On the plan page layout that you created, you have several graphs showing the status of the plans and the business. You see a concern in an area and you want to see the data behind it. What navigation should you use to see this data?
- A. You cannot see it on the plan outputs, and you will need to create a new table with the information.
- B. On the table in question, go to View > Show table.
- C. You cannot see it on the plan outputs, so you need to go into Planning Analytics and re-search the data.
- D. You cannot see it from the plan landing page, and you will need to search for the data.
- E. Go to Actions > View Data on the graph in question.
Answer: D
NEW QUESTION 22
You ran a demand plan with the data refresh option "Do not refresh with current data." Identify two true statements. (Choose two.)
- A. Forecasting engine will not run.
- B. Forecasting engine will run without advancing the plan date.
- C. Shipments history data will not be modified.
- D. Shipments forecast data will not be modified.
- E. Shipments history data will be updated.
Answer: B,C
NEW QUESTION 23
In which situation would Bills of Distribution be more effective than Sourcing Rules?
- A. When Organization A, Organization B, and Organization C transfer from Organization C
- B. When all organizations are buying from a single outside supplier
- C. When all organizations transfer 50% of the material from Organization B, and 50% from Organization C
- D. When Organization A buys from a Supplier; Organization B transfers from Organization A, and Organization C transfers from Organization B
- E. When Organization A, Organization B, and Organization C make their own products
Answer: D
NEW QUESTION 24
As a new planner, you want to test simulation set functionality. You have created a simulation set named
'Test Simulation Set.' In this simulation set, you have already added Item 98573. You would like to change the item specification 'Fixed Order Quantity' to 10 within this simulation set.
Which sequence will allow you to accomplish this task?
- A. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'Action'
> Select 'Edit' > Find Fixed Order Quantity specification> under the 'Action' column select 'set value as' > under the 'Value' column enter 10 - B. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'Action'
> Select 'Edit' > Find Fixed Order Quantity specification> under the 'Action' column select 'reset to original' > under the 'Value' column enter 10 - C. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight line for Item 98573 and scroll right until you find 'Fixed Order Quantity' > Change value to 10
- D. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'View'
> Select 'Columns' > Check box next to Fixed Order Quantity specification> the 'Fixed Order Quantity' will now show on the Item 98573 line > Highlight line for Item 98573 and scroll right until you find
'Fixed Order Quantity' > Change value to 10
Answer: A
NEW QUESTION 25
Your client wants to create a supply plan that only considers sales order and disregards forecast demand within a specific demand horizon. What must you do to accomplish this?
- A. Manage Plans > Search and select demand plan > Demand tab > General tab > Check Demand Time Fence Control
- B. Manage Plans > Search and select demand plan > Demand tab > General tab > Select 'Do no spread forecast'
- C. Manage Plans > Search and select supply plan > Supply tab > Organizations and Schedules tab > Remove all demand schedules
- D. Manage Plans > Search and select supply plan > Supply tab > General tab > Check Demand Time Fence Control
- E. Manage Plans > Search and select supply plan > Supply tab > General tab > Advanced Options > Check 'Create time fence'
Answer: D
NEW QUESTION 26
In order for Supply and Demand Plans to run successfully, which three Configure Planning Analytic tasks must be completed? (Choose three.)
- A. Set up Hierarchy Attributes
- B. Run the Configure Dimension Catalog process
- C. Set up Levels and Attributes
- D. Set up Measure Catalogs
- E. Set up Dimension Catalogs
- F. Set up Default Catalogs
Answer: C,D,E
NEW QUESTION 27
A customer would like to account for the production loss in the supply planning process using the item shrinkage rate planning specification.
Which statement reflects the system behavior to meet this requirement?
- A. Planning calculation creates scrap demand to compensate for loss and maintains supply.
- B. Planning calculates no additional demand but creates the additional required supply based on shrinkage factor.
- C. Planning process reduces the demand based on shrinkage factor and keeps the supply quantity as is.
- D. Planning calculation does not support shrinkage functionality.
Answer: A
NEW QUESTION 28
......
1Z0-1066-20 Exam Dumps - PDF Questions and Testing Engine: https://www.dumpstillvalid.com/1Z0-1066-20-prep4sure-review.html
