Get Real JN0-363 Exam Dumps [Feb-2023] Practice Tests
Last JN0-363 practice test reviews: Practice Test Juniper dumps
Juniper JN0-363 Exam Topics:
| Section | Objectives |
|---|---|
| Tunnels | - Identify the concepts, requirements, or functionality of IP tunneling:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IP tunnels:
|
| Border Gateway Protocol (BGP) | - Identify the concepts, operation, or functionality of BGP:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP:
|
| Intermediate System to Intermediate System (IS-IS) | - Identify the concepts, operation, or functionality of IS-IS:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS:
|
| Layer 2 Bridging or VLANs | - Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS:
- Identify the concepts, benefits, or functionality of VLANs:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs:
|
| Open Shortest Path First (OSPF) | - Identify the concepts, operation, or functionality of OSPF:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF:
|
| Spanning-Tree Protocols | - Identify the concepts, benefits, operation, or functionality of Spanning Tree Protocol and its variants:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot STP and its variants:
|
| High Availability | - Identify the concepts, benefits, applications, or requirements of high availability:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot high availability components:
|
| Protocol-Independent Routing | - Identify the concepts, operation, or functionality of various protocol-independent routing components:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components:
|
Juniper JN0-363 Exam Certification Details:
| Passing Score | Pass / Fail (60-70% Approx.) |
| Exam Name | Service Provider Routing and Switching Specialist |
| Exam Registration | PEARSON VUE |
| Duration | 90 minutes |
| Sample Questions | Juniper JN0-363 Sample Questions |
| Exam Price | $300 USD |
| Recommended Training | Junos Intermediate Routing (JIR) Junos Service Provider Switching (JSPX) Junos MPLS Fundamentals (JMF) |
| Number of Questions | 65 |
NEW QUESTION 39
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing.
Referring to the exhibit, which statement is true?
- A. The TCP session is not establishing
- B. The update messages contain an unsupported option
- C. The peer's AS number is misconfigured
- D. The neighbor does not support IPv6
Answer: C
NEW QUESTION 40
Referring to the exhibit, internal BGP between R1 and R2 is not establishing.
What is the problem In this scenario?
- A. R1 needs to be configured with an explicit router ID.
- B. R1 does not have a route to 192.168.200.2.
- C. R1 needs to be configured with a next-hop self policy.
- D. R1 and R2 must each have unique AS numbers.
Answer: B
NEW QUESTION 41
Which forwarding table designation is used to indicate that load balancing is working correctly?
- A. ucst
- B. ulst
- C. mlst
- D. msct
Answer: B
NEW QUESTION 42
Exhibit button
Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)
- A. Traffic from Network 1 to Network 3 and traffic from Network 1 to Network 4 each need their own unique label-switched path.
- B. R3 will perform a label swap operation on the transport MPLS label.
- C. Traffic from Network 1 to Network 3 and from Network 1 to Network 4 can share the same label-switched path.
- D. R3 will perform a label pop operation on the transport MPLS label.
Answer: B,D
NEW QUESTION 43
You confirm that the R2 and R3 routers are receiving a BGP route to the 203.0.113.0/24 network, but both routers display the route as hidden. Referring to the exhibit, which two actions solve this problem? (Choose two.)
- A. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for EBGP peering.
- B. Apply the routing policy on R1 as an export policy to the IBGP group.
- C. Apply the touting policy on R1 as an Import policy to the IBGP group.
- D. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for IBGP peering.
Answer: A,D
NEW QUESTION 44
In your RSVP network you have configured three separate LSPs to the same egress address. You have made no other configuration changes to the forwarding decisions made by the router.Which commands can you use to determine which LSP is being used to forward packets?
- A. show route table inet.4
- B. show rsvp neighbor
- C. show rsvp session
- D. show route table inet.3
Answer: D
NEW QUESTION 45
Exhibit
You have an established LSP between your R1 and R5 devices using the configuration shown in the exhibit. You are asked to ensure that MPLS labels are used to forward traffic by all devices within the LSP.
Which action will accomplish this behavior?
- A. Configure the explicit-null statement under the protocol mpls hierarchy on R1.
- B. Delete the no-espf statement under the R1_TO_R5 label switched path on R1.
- C. Configure the install statement under the R1_TO_R5 label switched path on R1.
- D. Configure the ultimace-hop-popping statement under the R1_TO_R5 label switched path on R1.
Answer: C
NEW QUESTION 46
You have created a routing instance named vr3 that will provide access to Server 2 (10.0.0.2) (or the hosts on the 10.10.10.0/24 network. Which command would you use to test connectivity between vr3 and Server 2?
- A. user@vr3> ping 10.0.0.2 count 5
- B. user9router1> ping 10.0.0.2 count 5
- C. user@router1> ping 10.0.0.2 routing-instance vr3 count 5
- D. user@vr3> ping 10.0.0.2 count 5 source 10.10.10.1
Answer: B
NEW QUESTION 47
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
- A. Nodes can successfully transmit simultaneously.
- B. It consists of a single broadcast domain.
- C. Nodes share a physical medium.
- D. Nodes use a step-up algorithm when collisions are detected.
Answer: B,C
NEW QUESTION 48
Exhibit
Which type of load balancing is shown in the exhibit?
- A. elastic load balancing
- B. per-flow load balancing
- C. per-packet load balancing
- D. network load balancing
Answer: D
NEW QUESTION 49
Exhibit
You are asked to assign interface xe-1/0/5 to a virtual switch.
What must be accomplished to complete the configuration?
- A. An IRB interface must be configured to routing-instance sw-1 vlan_2.
- B. Interface xe-1/0'5 must be a trunk port.
- C. Interface xe-1/0/5 must be added to routing-instance sw-1 vlan_2.
- D. Interface xe-1/0/5 must be added to routing-instance sw-1.
Answer: D
NEW QUESTION 50
Exhibit
Referring to the exhibit, which statement is true about VRRP?
- A. VRRP communication between the two devices is not functioning correctly.
- B. Both routers are in the same state because they have the same VRRP priority.
- C. The routers should use different virtual IP addresses for VRRP to function correctly.
- D. RRP Is functioning normally in active/active mode.
Answer: C
NEW QUESTION 51
Referring to the exhibit, which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?
- A. Frames will be counted by filterA only.
- B. Frames will be counted initially by filterB and then counted by filterA.
- C. Frames will be counted by filterB only.
- D. Frames will be counted initially by filterA and then counted by filterB.
Answer: D
NEW QUESTION 52
Click the Exhibit.
Referring to the exhibit, what is the correct OSPF interface state for the ge-0/0/1 interface?
- A. DR
- B. Down
- C. DRother
- D. BDR
Answer: A
NEW QUESTION 53
Exhibit
Referring to the exhibit, what must be included in the Route1 configuration when establishing an EBGP session with the ISP?
- A. The BGP session type internal must be specified.
- B. A local AS must be specified.
- C. The BGP session type external must be specified.
- D. A local address must be specified.
Answer: D
NEW QUESTION 54
Which two statements ate correct about the community BGP attribute on a Junos device? (Choose two.)
- A. If the community attribute is present, it is ignored and deleted in the BGP updates.
- B. The community attribute is an optional BGP attribute.
- C. If the community attribute is present, it should be passed unchanged in the BGP updates.
- D. The community attribute is a mandatory BGP attribute.
Answer: C,D
NEW QUESTION 55
Referring to the exhibit, which two statements are correct? (Choose two.)
ISP A AS 65501
ISP B AS 65502
Advertised Prefixes: 172.20.0.0/24 172.20.20.0/24 172.20.21.0/24
Advertised Prefixes: 172.20.0.0/24 172.20.1.0/24
- A. Devices In AS 65512 will prefer ISP B for traffic destined to the 172.20.0.0/24 network.
- B. Devices In AS 65512 will prefer ISP A for traffic destined to the 172.20.0.0/24 network.
- C. Devices in AS 65512 will prefer ISP B for traffic destined to the 172.20.21.0/24 network.
- D. Devices in AS 65512 will prefer ISP A for traffic destined to the 172.20.21.0/24 network.
Answer: C
NEW QUESTION 56
An IS-IS level 1-only router is configured within a larger multilevel hierarchy. Which OSPF area type resembles the routing information in the L1 router's table?
- A. OSPF NSSA
- B. OSPF stub area
- C. OSPF default area
- D. OSPF NSSA with no summaries
Answer: D
NEW QUESTION 57
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)
- A. LSP
- B. IIH
- C. CSNP
- D. PSNP
Answer: C,D
NEW QUESTION 58
What is the TTL value for EBGP?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 59
Click the Exhibit button.
You are configuring an IBGP group. When you commit your configuration, you receive the error shown in the exhibit.
Which additional configuration parameter must you add to your configuration?
- A. type external
- B. export <policy name>
- C. type internal
- D. multipath
Answer: C
NEW QUESTION 60
Click the exhibit.
You have configured OSPF between two routers. The OSPF adjacency will not form.
Referring to the exhibit, what is the problem?
- A. The router is not sending hellos on the configured interface.
- B. The OSPF version does not match on the configured interfaces.
- C. Router is not receiving hellos on the configured interface.
- D. The area does not match on the configured interfaces.
Answer: D
NEW QUESTION 61
You are bringing a new network online with three MX Series devices enabled for STP. No root bridge priority has been configured. Which statement is true in this scenario?
- A. The device with the lowest numerical lo0 IP address will be elected as the root bridge.
- B. The device with the lowest MAC address will be elected as the root bridge.
- C. The device with the highest MAC address will be elected as the root bridge.
- D. The device with the highest numerical lo0 IP address will be elected as The bridge.
Answer: B
NEW QUESTION 62
......
Get Ready to Pass the JN0-363 exam with Juniper Latest Practice Exam : https://www.dumpstillvalid.com/JN0-363-prep4sure-review.html
Try JN0-363 Free Now! Real Exam Question Answers: https://drive.google.com/open?id=15HW-_ITn9JePaRffwBsPyKHW6N5Z8Xz9
