Get Latest [Nov-2021] Conduct effective penetration tests using DumpStillValid 21450T
Penetration testers simulate 21450T exam PDF
NEW QUESTION 28
When Station Lock is activated on a station, what all calls are allowed?
- A. Incoming Call
- B. Internal - Station to Station Calls
- C. Emergency Calls
- D. Outgoing Calls
- E. SIP Calls
Answer: A
NEW QUESTION 29
What does the Class of Service (COS) setting control?
- A. the level of service that the user will receive
- B. the capabilities or limits of calling privileges
- C. the pre-defined features that a user can access and use
- D. the applications that a user can access and use
Answer: C
NEW QUESTION 30
Which three features are parts of COS? (Choose three.)
- A. Console Permissions
- B. Auto Callback
- C. Data Privacy
- D. Bridged Call Appearance
- E. ISDN-PRI
Answer: A,B,C
Explanation:
NEW QUESTION 31
Which ACD feature when activated will temporarily stop calls being routed to that agent?
- A. TIME_ OUT
- B. AUX-WORK
- C. PAUSE_ BREAK
- D. TEMP_ OFFLINE
Answer: B
NEW QUESTION 32
Which Facility Restriction Level (FRL) gives the lowest level of permissions?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 33
From which interface you can add, delete or change a user login ?
- A. Bash interface of System Manager
- B. Element Cut-Through using System Manager
- C. SAT interface using PuTTY
- D. System Management Interface
Answer: C
NEW QUESTION 34
The Trunk Group Summary report provides traffic measurements for all trunk groups except for which category?
- A. All outgoing calls
- B. All call completions
- C. All incoming calls
- D. Personal Central Office Line Groups
Answer: B
Explanation:
NEW QUESTION 35
What is the maximum Total Length allowed for a FAC?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 36
You are creating a new ISDN trunk group in a production system and you want to know the capacity and features that are enabled in the installed license file of the system.
Which command will provide this information?
- A. display system-parameters security
- B. display system-parameters customer-options
- C. display system-parameters features
- D. display system-parameters maintenance
Answer: B
Explanation:
NEW QUESTION 37
You are configuring Personal Station Access (PSA) in Communication Manager with the following settings: a/ Set TTI enabled = 'y', b/ Set PSA Associate code =*25' and dissociate code = '#25', c/Set security code for the station = '1234'. .
You activate the station by keying in the FAC for PSA, the station extension number,
'#', the security code of the station, and '#'. However, the station is not activated.
Which statement describes the issue to be addressed?
- A. You did not key in the correct activation sequence.
- B. You need to set TTl= 'n'.
- C. You should not set the security code in sequential order.
- D. You did not enable PSA on the COS of the station.
Answer: D
NEW QUESTION 38
Each entry on an Abbreviated Dialing List can have how many characters?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
NEW QUESTION 39
Which Communication Manager SAT command must be used to backup changes
made in volatile RAM to the hard disk, so that in case of a loss of power, the changes will be available?
- A. copy running-configuration startup-configuration
- B. copy translation all
- C. save translation
- D. save translation startup-configuration
Answer: C
NEW QUESTION 40
When taking a local backup using SCP backup data within SMI where are the resultant files stored by default?
- A. /var/home/scp/pub
- B. /var/home/ftp/priv
- C. /var/home/scp/priv
- D. /var/home/ftp/pub
Answer: D
NEW QUESTION 41
Which statement most accurately describes the major difference between
Automatic
Alternative Routing (AAR) and Automatic Route Selection (ARS) in a typical installation?
- A. AAR routes calls over a private network; ARS routes calls over a public network.
- B. AAR routes calls over a public network; ARS routes calls over a private network.
- C. AAR chooses routes automatically; ARS chooses routes according to pre- programmed, best-choice parameters.
- D. AAR chooses routes automatically; ARS chooses routes according to a manually administered route plan.
Answer: A
NEW QUESTION 42
Which statement describes the function of the Automatic Callback feature?
- A. It allows internal users who placed a call to a busy or unanswered internal telephone to be called back when the called telephone becomes available.
- B. It allows internal users who are called when they are busy to activate a feature to automatically call back that second caller, once the first call is finished.
- C. It allows external users who are called when they are busy to place the second call on hold until the first call is finished.
- D. It allows external users who placed a call to a busy or unanswered internal telephone to be called back when the called telephone becomes available.
Answer: A
NEW QUESTION 43
Which command must be used to define the system internal number scheme of the extensions?
- A. change dialplan analysis
- B. change uniform-dialplan
- C. change node-names ip
- D. change dialplan parameters
Answer: A
NEW QUESTION 44
Which component handles the registration of SIP Endpoints?
- A. Session Manager
- B. System Manager
- C. Layer 2 switch
- D. Communication Manager
Answer: A
NEW QUESTION 45
Which two processes are associated with PSA? (Choose two.)
- A. Merge
- B. Terminate
- C. Separate
- D. Associate
- E. Disassociate
Answer: D,E
NEW QUESTION 46
When creating an administrator account, what is the setting in the user profile that allows full access for all commands?
- A. rw
- B. rm
- C. wm
- D. r-
Answer: C
NEW QUESTION 47
What three security violations are counted on the " Security Violations Status Report"? (Choose three.)
- A. barrier code
- B. authorization code
- C. tac code
- D. feature code
- E. station security code
Answer: A,B,E
NEW QUESTION 48
A range of User Profiles in Communication Manager are
fixed to a specific Purpose; for example, prof18 is SuperUser.
What is the range allocated for User Defined User Profiles?
- A. 10-100
- B. 18-64
- C. 32-64
- D. 20-69
Answer: D
Explanation:
NEW QUESTION 49
Which COR is assigned by default when adding a new station?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 50
To enable a user to login using a H.323 Soft Client, which feature must be enabled on their Endpoint/Station form?
- A. Remote Worker
- B. IP SoftPhone
- C. Soft Client
- D. PC
Answer: B
NEW QUESTION 51
Which license feature option must be showing as enabled ( "Y") in system-parameters customer options before you can administer Meet-me conference?
- A. Enhanced Conferencing?
- B. Conferencing Allowed?
- C. Vectoring?
- D. Meet-me Enabled?
Answer: A
NEW QUESTION 52
"Enhanced Call Pickup Alerting" can be enabled using which command?
- A. change station XXXXX
- B. change system-parameters customer-options
- C. change system-parameters security
- D. change system-parameters feature
Answer: D
NEW QUESTION 53
......
Tested Material Used To 21450T Test Engine: https://www.dumpstillvalid.com/21450T-prep4sure-review.html
