[Dec-2025] 300-610 Dumps are Available for Instant Access from DumpStillValid
Study resources for the Valid 300-610 Braindumps!
Cisco 300-610 exam is an essential certification for IT professionals who are looking to demonstrate their expertise in designing data center infrastructure. 300-610 exam is designed to be challenging, but with the right preparation and resources, candidates can achieve success and earn their CCNP Data Center certification.
NEW QUESTION # 83
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. Ethernet and unified ports on the same port channel
- B. VSS that has unified uplinks
- C. cross-connections with pinning
- D. vPC that has unified uplinks
Answer: D
NEW QUESTION # 84
Refer to the exhibit.
Refer to the exhibit. Two Cisco Nexus 9000 Series Switches exchange OSPF routing information with R1. Which action accomplishes this goal?
- A. Add peer-gateway under vPC domain.
- B. Add layer3 peer-router under vPC interface link.
- C. Add layer3 peer-router under vPC domain.
- D. Add peer-gateway under vPC interface link.
Answer: C
NEW QUESTION # 85
DRAG DROP
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Select and Place:
Answer:
Explanation:
Section: Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/virtual_device_context/ configuration/guide/b-7k-Cisco-Nexus-7000-Series-NX-OS-Virtual-Device-Context-Configuration-Guide/ creating-vdc.html
NEW QUESTION # 86
An engineer must connect an existing Cisco UCS Fabric Interconnect to an IP-based storage array. The connection must be a port channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic.
Which port type should be used to meet these requirements?
- A. server
- B. uplink
- C. appliance
- D. network
Answer: B
NEW QUESTION # 87
Which two configuration methods can be used to deploy QoS to Cisco MDS Series switches? (Choose two.)
- A. VSAN-based QoS
- B. multiple QoS policies that match multiple devices
- C. zone-based QoS
- D. FCoE VLAN-based QoS
- E. multiple QoS policies that match individual devices
Answer: A,C
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/7_3/configuration/qos/ cisco_mds9000_qos_config_guide/configuring_qos.html
NEW QUESTION # 88
A customer is deploying a SAN based on Cisco MDS 9000 Series Switches. Each Inter-Switch Link must carry multiple VSANs at the same time. The access switch must share the same domain ID as the director switch to reduce the number of domain IDs needed in the fabric Drag and drop the operational port types from the right onto the boxes on the left to create a topology that meets these requirements. Not all port types are used. Port types are used more than once.
Answer:
Explanation:
NEW QUESTION # 89
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 90
Which technology enables Layer 2 extension between remote data center sites?
- A. OTV
- B. DMVPN
- C. GRE
- D. FCIP
Answer: A
Explanation:
Section: Network Design
Explanation/Reference: https://netcraftsmen.com/spanning-layer-2-between-data-centers/
NEW QUESTION # 91
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 92
Which two configuration methods can be used to deploy QoS to Cisco MDS Series switches? (Choose two.)
- A. VSAN-based QoS
- B. multiple QoS policies that match multiple devices
- C. zone-based QoS
- D. FCoE VLAN-based QoS
- E. multiple QoS policies that match individual devices
Answer: A,C
NEW QUESTION # 93
An end user is experiencing network latency when accessing a database in a disaster recovery site. The monitoring team concluded that the database was writing simultaneously to the storage arrays on the primary and disaster recovery sites.
Which design resolves this issue?
- A. asynchronous replication between data centers
- B. synchronous replication between data centers
- C. FCoE tunnel between data center
- D. FCIP tunneling between data center
Answer: A
NEW QUESTION # 94
An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes. In addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6. Which two components should be used to meet these requirements (Choose two.)
- A. mgmt0 interface
- B. SNMP
- C. SSM protocol
- D. Telnet protocol
- E. SVI interface
Answer: A,B
Explanation:
We are talking about management only, so SSM is out. Since we need to separate between data and control plane, we should use mgmt0 interface, so SVI interface is out. Since we need to use encryption and authentication, this can be done in SNMPv3, while telnet does not support encryption, so telnet is out.
NEW QUESTION # 95
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 96
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?
- A. Each VDC has a dedicated out-of-band Ethernet management port.
- B. Each VDC has a unique out-of-band IP address from the same IP subnet.
- C. Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.
- D. All the VDC have the same out-of-band IP address.
Answer: B
NEW QUESTION # 97
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 98
An engineer is implementing a storage area network where an NPV is used. The engineer notices that the servers in a storage farm are experiencing heavy traffic contention. The engineer needs to migrate traffic from heavily loaded server interfaces to interfaces with less load. When the new links are deployed, the existing traffic is not rebalanced as expected. Which feature must be used to meet these requirements?
- A. DVM
- B. disruptive load balancing
- C. NPIV
- D. multiple VSAN support
Answer: C
NEW QUESTION # 99
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 100
An engineer must interconnect customer data centers by using a 10-Gbps. unicast-only, Layer 3 circuit The requirement is to stretch the Layer 2 connection over the tunnel isolate STP traffic and create more than two million logical network segments Much solution meets these requirements?
- A. VXLANEVPN
- B. IPsec over GRE
- C. dark fiber
- D. OTV
Answer: B
NEW QUESTION # 101
An engineer must provide Layer 2 adjacency between data centers that are in two locations and separated by a routed network. The adjacency must be based on Cisco Nexus 7000 Series Switches. The solution must offload learning of host reachability information to the control plane to avoid excessive flood and learn congestion. Also the data center in one of the sites experiences a large volume of unknown unicast traffic that the solution must mitigate.
Which data center interconnect technology meets these requirements?
- A. LISP
- B. VPLS
- C. OTV
- D. VXLAN
Answer: D
NEW QUESTION # 102
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION # 103
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A. Cisco Nexus Fabric Manager
- B. Cisco Virtual Topology System
- C. Cisco CloudCenter
- D. Cisco Data Center Network Manager
Answer: D
NEW QUESTION # 104
......
Cisco 300-610 exam is designed for professionals who want to validate their skills in designing Cisco data center infrastructure. Designing Cisco Data Center Infrastructure certification exam covers a range of topics related to data center infrastructure design, including data center networking, storage networking, compute networking, automation, and security. Passing 300-610 exam is a crucial step for professionals who want to advance their career in the field of data center infrastructure design.
Updated 300-610 Tests Engine pdf - All Free Dumps Guaranteed: https://www.dumpstillvalid.com/300-610-prep4sure-review.html
Latest CCNP Data Center 300-610 Actual Free Exam Questions: https://drive.google.com/open?id=1SMGmF2EQc0y9xoH5C6DQTOcaLECjBWPu
