Brilliant 5V0-41.20 Exam Dumps Get 5V0-41.20 Dumps PDF
5V0-41.20 Dumps PDF - 5V0-41.20 Real Exam Questions Answers
What is the duration, language, and format of VMware 5V0-41.20: VMware SD-WAN Troubleshoot Exam
- Number of Questions: 60
- Passing Score of 300
- Type of Questions: Single and Multiple Choice, Proctored.
- Language: English
- Length of Examination: 120 mins
- This is a popular test method, and the exam can contain both scored and unscored queries. Your exam scores can just reflect on how well you did on the scored questions; you will not know how well you did on the unscored ones. The raw cut score is given a ranking of 300, and VMware evaluations are rated on a scale of 100 to 500. Using scalable scoring, raw scores from different VMware exams may be scaled to a consistent meaning. Depending on the hardware or competency requirements, VMware assessments have various raw passing ratings. A scaled score assigns a regular range to test takers, allowing for easy and fair comparisons of results from one exam form to the next.
NEW QUESTION 14
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.
What is a possible reason for this?
- A. There is an invalid MTU configuration at Chicago.
- B. Cloud VPN for the Edges / Profiles is not enabled.
- C. OSPF or BGP is not enabled.
- D. The routing table on the Edges has not been initialized.
Answer: B
NEW QUESTION 15
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.
Exhibit.
A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.
What are two effective ways the administrator can accomplish this? (Choose two.)
- A. In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.
- B. Modify the AS Path in New York to be longer for 10.20.11.0/24.
- C. Modify the AS Path in New York to be shorter for 10.20.11.0/24.
- D. In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.
Answer: A,D
NEW QUESTION 16
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certconfigurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure thatall sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide HA. When configuring VRRP, the SD-WAN Edge service restarted.
What caused this behavior?
- A. This is an expected behavior.
- B. The administrator failed to specify the Edge Type as a VeloCloud Cluster.
- C. The device is faulty and will need a replacement.
- D. The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.
Answer: A
NEW QUESTION 17
Scenario 1:
A network administrator is tasked! with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites- One is an Internet-only site and two are Hybrid locations with both internet and MPLS: The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
An administrator is attempting to activate two Edge devices at the Chicago branch location. The local technician reports that the Edge devices are not coming online. The Edge devices have been plugged in, powered on, and connected to the correct circuits with an Enhanced HA setup.
What should the local technician check first when troubleshooting the issue?
- A. Review color of the LED.
- B. Verify the link light sequence of the HA ports.
- C. Review the Orchestrator for HA misconfiguration issues.
- D. Verify beep sequence of the Edge devices.
Answer: B
NEW QUESTION 18
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
One branch location is not able to communicate with another branch location via dynamic branch-to-branch tunnels. While troubleshooting at the Edge configuration level, the network administrator notices Cloud VPN is not enabled and is grayed out, preventing them from enabling that feature.
- A. Within the Test & Troubleshooting section under Remote Diagnostics.
- B. Where is the next location to check for and enable the necessary feature?
- C. Within the Configuration section under Profiles. Within the Monitor section under Network Services.
- D. Within the Configuration section under Customer VPN enablement.
Answer: D
NEW QUESTION 19
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
Several reports have come in from branch locations indicating customers cannot reach applications being served by the hub location. The hub location has a single LAN-side port from which it should be learning dynamic routes for the subnets serving the applications.
How should the technician verify if the ports on the Edge are up and working?
- A. Look under Administration and System Settings to verify if the interfaces are configured and enabled.
- B. Look in Test&Troubleshoot under the Remote Diagnostics and run Interface status.
- C. Look in Test&Troubleshoot under the Remote Actions and run System Health.
- D. Look in Test&Troubleshoot under the Remote Diagnostics and run System Health.
Answer: A
NEW QUESTION 20
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
The network administrator has been made aware that Chicago is receiving traffic from non-SD-WAN sites, bottlenecking Chicago's interfaces. The network administrator's VMware SE has mentioned using the uplink feature to help resolve this.
What are two ways the uplink feature should be used in this scenario? (Choose two.)
- A. Set the uplink community to forward traffic to a group of neighbors.
- B. Direct all traffic to that neighbor designated as an uplink,
- C. Prevent the site in question from becoming a transit site.
- D. Stop mutual redistribution of routes from underlay and overlay.
Answer: B,C
NEW QUESTION 21
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed thatduring certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at the Dallas Branch are complaining that downloads/uploads from Office365 are slow. Working in Teams has been providing slow responses. The Internet circuit is 100Mbps while the MPLS Circuit is
45Mbps. Upon troubleshooting, the network administrator has noticed the traffic is Backhauling through the Seattle hub for all internet traffic.
How should the network administrator resolve the issue?
- A. Leave the system as is, the gateways will resolve the issues after doing 15 minutes of link qualification.
- B. Prevent the hub from advertising a default route.
- C. Advertise public routes to Office365 and Teams through the New York Hub.
- D. Leave the system as is, the hubs will auto-rebalance tunnels after doing 15 minutes of link qualification.
Answer: C
NEW QUESTION 22
Scenario 2:
After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing.
Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.
What could be preventing Edges from being able to establish dynamic tunnels?
- A. Neither profile has been configured to utilize cloud gateways.
- B. The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.
- C. The profiles are not configured to allow dynamic branch to branch VPNs.
- D. None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.
Answer: C
NEW QUESTION 23
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network engineer is configuring an Internet Backhaul Policy for the Chicago Branch to utilize NY's hub as a much better source for Internet for certain SaaS applications. For an unknown reason, the network engineer is not able to select the hubs in the Internet Backhaul Policy.
What could be the reason?
- A. The Edge's profile does not include Backhaul hubs as an option.
- B. The hub is not configured with the proper IP address.
- C. Dynamic Branch to Branch using gateways has not been enabled.
- D. The Dynamic Branch to Branch has not been enabled.
Answer: C
NEW QUESTION 24
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY Hub location. While attempting to deploy the VNF, the process keeps failing.
Where can the administrator check to see more detail?
- A. VCO > Monitor > Logging
- B. VCO > Test & Troubleshoot > Remote Diagnostics > Events
- C. VCO > Test & Troubleshoot > Remote Actions > Alerts
- D. VCO > Monitor > Events
Answer: A
NEW QUESTION 25
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that callquality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Users at multiple branches complain that a highly performant SQL Database cluster residing at the New York Data Center is not responding to database queries or inserts as expected. It is affecting the order management site. A network administrator investigates and finds that traffic from the branches are going through Seattle to reach the SQL Cluster in New York. The design for this SD-WAN network does not call for routing security.
The SQL Cluster is reachable through either Data Center, but for performance reasons, must flow through the New York DC. The network administrator has verified that the routes are not present in the OFC and the BGP neighborship is down in Network Services.
Refer to the Exhibit(s).
Exhibit.
What should the administrator verify?
- A. The BGP Authentication matches on both sides.
- B. The BGP configuration has a filter in place to deny the prefix in Seattle.
- C. Backhauling through the Seattle DC is disabled.
- D. The BGP configuration has a filter in place to deny the prefix in New York.
Answer: C
NEW QUESTION 26
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already configured Business Policies based on these requirements.
What is the sequence of parameters that the administrator can check to troubleshoot this problem? (Choose two.)
- A. Check underlay network (bandwidth, latency, jitter, packet loss).
- B. Change the bandwidth measurement under WAN Overlay Advanced Settings.
- C. Review Business Policies configuration and match them against the business requirements.
- D. Under Monitor, check Routing tab.
Answer: A,D
NEW QUESTION 27
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator is trying to create multiple overlays on a single physical interface on an Edge. The administrator is able to bring up only a single overlay so far, but is having trouble with bringing up additional overlays.
What could be the possible reason?
- A. The licensing does not support multiple overlays on a single physical interface.
- B. Multiple overlays cannot be created on a single physical interface. Multiple physical interfaces are needed.
- C. The administrator does not have the right permission to create multiple overlays. The administrator needs to have an Operator-level privilege for this task.
- D. On the WAN overlay configuration, verify the IP address, next-hop, and the VLAN ID configuration.
Answer: A
NEW QUESTION 28
......
How to study the VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam
Two resource forms may be used to prepare for qualification tests. The first are elaborated and relevant learning guides, reference books, and research boards for constructing knowledge from the ground up. Aside from that, video guides and seminars are a nice way to alleviate the pain of studying and make the experience more enjoyable, but they need time and attention from the learner. Candidates who want to develop a strong foundation in both test topics and related technology combine video lectures with study guides to get the most out of both. Practice exams or practice exam engines are an effective learning method that most candidates overlook. Exam candidates will assess their knowledge of skills learned in class and become more relaxed and familiar with the real exam setting by taking 5V0-41.20 practice exams designed by our experts.Exam anxiety, according to statistics, plays a far larger part in students' exam failure than apprehension of the uncertain. Our professional team at DumpStillValid suggests taking some notes on these topics and practicing with VmWare 5V0-41.20 dumps, which has been published by our team of experts and will help you pass this test.
Valid 5V0-41.20 Test Answers & VMware 5V0-41.20 Exam PDF: https://www.dumpstillvalid.com/5V0-41.20-prep4sure-review.html
