350-401 Exam Preparation Material with New 350-401 Dumps Questions
350-401 2024 Training With 981 QA's
Cisco 350-401 exam is part of the new CCNP Enterprise certification path and is designed for network engineers who are interested in advancing their skills and knowledge of Cisco Enterprise Network technologies. 350-401 exam is essential for professionals who want to take their career to the next level and become experts in implementing and managing Cisco Enterprise Networks.
The 350-401 ENCOR exam is a comprehensive exam that covers a range of topics, including network architecture, virtualization, infrastructure, network assurance, security, automation, and programmability. 350-401 exam comprises of 90-110 questions and has a duration of 120 minutes. The questions are a combination of multiple-choice and simulation-based questions that test the candidate's practical skills and knowledge.
NEW QUESTION # 553
Drag and drop the virtual components from the left onto their deceptions on the right.
Answer:
Explanation:
Explanation:
Diagram, line chart Description automatically generated
NEW QUESTION # 554 
An engineer applies this configuration to router R1. How does R1 respond when the user 'cisco' logs in?
- A. It displays the startup config and then terminates the session.
- B. It places the user into EXEC mode but permits the user to execute only the show startup-config command
- C. It displays the startup config and then permits the user to execute commands
- D. It places the user into EXEC mode and permits the user to execute any command
Answer: D
Explanation:
When the user 'cisco' logs in, router R1 will place the user into EXEC mode and permit the user to execute any command. This is because the configuration applied to the router determines the level of access granted to the user upon login. In Cisco routers, EXEC mode provides a higher level of access where users can execute various commands to configure and manage the device.
NEW QUESTION # 555
Refer to the exhibit. A network administrator configured RSPAN to troubleshoot an issue between switch1 and switch2. The switches are connected using interface GigabitEthernet 1/1. An external packet capture device is connected is switch2 interface GigabitEthernet 1/2. Which two commands must be added to complete this configuration? (Choose two)
- A. Option A
- B. Option E
- C. Option C
- D. Option B
- E. Option D
Answer: A,B
NEW QUESTION # 556
Drag and Drop Question
Drag and drop the snippets onto the blanks within the code to construct a script that configures a loopback interface with an IP address. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 557
Which technology is used to provide Layer 2 and Layer 3 logical networks in the Cisco SD-Access architecture?
- A. VPN routing/forwarding
- B. overlay network
- C. underlay network
- D. easy virtual network
Answer: B
NEW QUESTION # 558 
Answer:
Explanation:
See the solution below in Explanation.
Explanation:
router bgp 10
bgp router-id 10.1.1.111
no bgp defa ipv4-unicast
nei 209.165.200.226 remote-as 20
nei 209.165.202.130 remote-as 30
address-family ipv4
neigh 209.165.200.226 activate
neigh 209.165.202.130 activate
network 10.1.1.10 mask 255.255.255.255
network 209.165.201.10 mask 255.255.255.255
network 209.165.201.20 mask 255.255.255.255
wr
NEW QUESTION # 559
Refer to the exhibit. Which command set enables router R2 to be configured via NETCONF?
- A. R1(config)# snmp-server manager
R1(config)# snmp-server community ENCOR rw - B. R1(config)# snmp-server manager
R1(config)# snmp-server community ENCOR ro - C. R1(config)# netconf
R1(config)# ip http secure-server - D. R1(config) # username Netconf privilege 15 password example_password R1(config)# netconf-yang R1(config)# netconf-yang feature candidate-datastore
Answer: D
Explanation:
https://developer.cisco.com/docs/ios-xe/#!enabling-netconf-on-ios-xe/authentication
NEW QUESTION # 560
An engineer is configuring Local WebAuth on a Cisco Wireless LAN Controller. According to RFC 5737, WHICH VIRTUAL IP address must be used in this configuration?
- A. 192.168.0.1
- B. 1.1.1.1
- C. 172.20.10.1
- D. 192.0.2.1
Answer: D
Explanation:
The correct answer is A, 192.0.2.1. According to RFC 5737, the virtual IP address used in the configuration of Local WebAuth on a Cisco Wireless LAN Controller should be from the block of addresses reserved for documentation and example code, which includes the 192.0.2.0/24 range. This ensures that there is no conflict with real IP addresses in use on the network. References: This is supported by the Cisco documentation on configuring virtual interfaces, which recommends using a non-routable IP address from the RFC5737 ranges for the virtual interface to avoid conflicts with network infrastructure addresses2.
NEW QUESTION # 561
Refer to the exhibit.
Which commands are required to allow SSH connection to the router?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 562
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
- A. Permit 10.0.0.1.0.0.0.0
- B. Permit 10.0.0.0.0.0.0.1
- C. Permit 10.0.0.1.0.0.0.254
- D. Permit 10.0.0.0.255.255.255.254
Answer: C
Explanation:
Explanation
Remember, for the wildcard mask, 1s are I DON'T CARE, and 0s are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum: 0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a "0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all oddnumbered hosts in the 10.0.0.0/24 subnet.
NEW QUESTION # 563
In a Cisco SD-Access solution, which protocol is used by an extended node to connect to a single edge node?
- A. 802 1Q
- B. VXLAN
- C. IS-IS
- D. CTS
Answer: A
NEW QUESTION # 564
How does an on-premises infrastructure compare to a cloud infrastructure?
- A. On-premises can increase compute power faster than cloud
- B. On-premises offers faster deployment than cloud
- C. On-premises requires less power and cooling resources than cloud
- D. On-premises offers lower latency for physically adjacent systems than cloud.
Answer: D
NEW QUESTION # 565
Which TLV value must be added to Option 43 when DHCP is used to ensure that APs join the WLC?
- A. 0x77
- B. 0xf1
- C. AAA
- D. 0
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp- option-43-00.html
NEW QUESTION # 566 
Refer to the exhibit. An engineer is configuring an EtherChannel between Switch1 and Switch2 and notices the console message on switch2. Based on the output, which action resolves this issue?
- A. Configure less member ports on Switch2.
- B. Configure more member ports on Switch1.
- C. Configure the same port channel interface number on both switches
- D. Configure the same EtherChannel protocol on both switches
Answer: D
Explanation:
The error message "channel-misconfig error detected" indicates a misconfiguration in the EtherChannel setup between two switches. This can occur when there is a mismatch in EtherChannel protocols being used on each switch involved in the EtherChannel configuration. To resolve this issue, both switches should be configured to use either PAgP (Port Aggregation Protocol) or LACP (Link Aggregation Control Protocol), ensuring protocol consistency across both switches.
References: Implementing and Operating Cisco Service Provider Network Core Technologies
NEW QUESTION # 567
An engineer must protect their company against ransom ware attacks. Which solution allows the engineer to block the execution stage and prevent file encryption?
- A. Use Cisco AMP deployment with the Malicious Activity Protection engineer enabled.
- B. Use Cisco Firepower with Intrusion Policy and snort rules blocking SMB exploitation.
- C. Use Cisco AMP deployment with the Exploit Prevention engine enabled.
- D. Use Cisco Firepower and block traffic to TOR networks.
Answer: A
Explanation:
Explanation
Ransomware are malicious software that locks up critical resources of the users.
Ransomware uses well-established public/private key cryptography which leaves the only way of recovering the files being the payment of the ransom, or restoring files from backups.
Cisco Advanced Malware Protection (AMP) for Endpoints Malicious Activity Protection (MAP) engine defends your endpoints by monitoring the system and identifying processes that exhibit malicious activities when they execute and stops them from running. Because the MAP engine detects threats by observing the behavior of the process at run time, it can generically determine if a system is under attack by a new variant of ransomware or malware that may have eluded other security products and detection technology, such as legacy signature-based malware detection. The first release of the MAP engine targets identification, blocking, and quarantine of ransomware attacks on the endpoint.
Reference: https://www.cisco.com/c/dam/en/us/products/collateral/security/ampfor- endpoints/white-paper-c11-740980.pdf
NEW QUESTION # 568
Drag and drop the characteristics from the left onto the deployment models on the right Not all options are used.
Answer:
Explanation:
NEW QUESTION # 569
......
Cisco 350-401 certification exam is an excellent opportunity for IT professionals to demonstrate their knowledge and skills in enterprise-level network technologies. It is a valuable credential that is recognized globally and can help advance your career in the IT industry. With proper preparation and study, you can successfully pass the exam and achieve this highly sought-after certification.
Quickly and Easily Pass Cisco Exam with 350-401 real Dumps: https://www.dumpstillvalid.com/350-401-prep4sure-review.html
Cisco 350-401 Certification Exam Questions: https://drive.google.com/open?id=1gtUaDySB6NHI5fB-cagrZm0C9qUDpS37
