300-810 Free Certification Exam Material from DumpStillValid with 122 Questions
Use Real 300-810 - 100% Cover Real Exam Questions
NEW QUESTION 49
Refer to the exhibit.
Troubleshooting an internal Jabber login issue and you see this logging snippet from the Jabber PRT file. You already checked that the Jabber client has a connection to the correct DNS server. Which DNS record is missing for service discovery of Cisco Unified Communications Manager for the login process to proceed further?
- A. A record _cuplogin._tcp.example.com
- B. A record _cisco-uds._tcp.example.com
- C. SRV record _cisco-uds._tcp.example.com
- D. SRV record _cuplogin._tcp.example.com
Answer: D
NEW QUESTION 50
Refer to the exhibit.
Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?
- A. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
- B. The port specified on the SRV record is wrong.
- C. The domain ccnp.cisco.com does not exist on the DNS server.
- D. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
Answer: B
NEW QUESTION 51
Fraudulent calls are being made from Cisco Unity Connection. Which action prevents the calls from reaching the PSTN using SCCP integration?
- A. Change the CSS of the voicemail port.
- B. Remove values from restriction table.
- C. Change the configuration of the routing rule.
- D. Change the Rerouting CSS on the trunk to Cisco Unity Connection.
Answer: A
NEW QUESTION 52
Refer to the exhibit.
Which statement is true?
- A. IM&P nodes in each subscluster must be configured from the same OVA template.
- B. If the IM&P node in sub-cluster-1 goes down, then users assigned to it are randomly split between the two remaining subclusters.
- C. The administrator must add one node to each subcluster for high availability.
- D. Each Cisco IM&P subcluster must have the same number of nodes.
Answer: C
NEW QUESTION 53
Refer to the exhibit.
A collaboration engineer has integrated Cisco Unity Express with Cisco Unified Communications Manager Express and is experimenting with the MWI feature. With the current configuration, no MWI change occurs when leaving new messages or after playing new messages. Which two changes are needed to correct the configuration? (Choose two.)
- A. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.254 expires 3600 port 5060 transport udp - B. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport tcp notify - C. ccn subsystem sip mwi sub-notify
- D. ccn subsystem sip mwi envelop-info
- E. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport udp unsolicited - F. ccn subsystem sip mwi sip outcall
Answer: E,F
NEW QUESTION 54
A user complains that incoming calls are being forwarded to another extension before being transferred to voicemail. The user expects calls to be transferred to their voicemail faster if they do not answer the phone.
The administrator is managing calls with the supervised transfer option on a Cisco Unity Connection call handler. What should the administrator change to resolve this issue?
- A. Rings to Wait
- B. T302 Timer
- C. No Answer Ring Duration (seconds)
- D. Release to switch
Answer: D
NEW QUESTION 55
Refer to the exhibit.
After configuration of the Cisco IM&P cluster in high-availability mode, both IM&P servers remain in the initializing state. Which two actions ensure normal operations of this IM&P high-availability cluster? (Choose two.)
- A. Ensure that an equal number of users are assigned to each IM&P server.
- B. Verify that the Cisco XCP SIP Federation Connection Manager service is running.
- C. Restart the Server Recovery Manager service in Cisco Unified Serviceability - Network Services on both IM&P servers.
- D. Confirm that Cisco Presence Engine, Cisco XCP Router, and Cisco DB services are up and running on both IM&P servers.
- E. Clear the Enable High Availability check box in the Presence Redundancy Group configuration.
Answer: A,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/ configAdminGuide/10_5_1/CUP0_BK_CE43108E_00_config-admin-guide-imp-105/ CUP0_BK_CE43108E_00_config-admin-guide-imp-105_chapter_010010.html
NEW QUESTION 56
Drag and drop the steps from the left into the correct order on the right that describes the flow of presence updates when a user manually sets the presence status in Cisco Jabber. Not all options are used.
Answer:
Explanation:
NEW QUESTION 57
After integrating Cisco Unity Express with Cisco Unified Communications Manager Express, users report that the system does not respond to their digit presses. Which two configuration snippets resolve this issue?
(Choose two.)
- A. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g711ulaw - B. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay rtp-nte
codec g711ulaw - C. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g729r8 - D. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g729r8 - E. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g711ulaw
Answer: A,B
NEW QUESTION 58
Refer to the exhibit.
Which protocol is used for communication between Cisco IM and Presence and Microsoft Exchange Server?
- A. POP3
- B. XMPP
- C. IMAP
- D. EWS
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/presence.html
NEW QUESTION 59
An administrator is configuring Cisco Jabber 12.8 to work with Cisco UCM and Cisco IM and Presence 12.5 using an encrypted SIP profile. Which record should be configured for Jabber to work when logging into the corporate network with the domain "domain.com?
- A. DNS SRV query _cisco-uds._tls.domain.com
- B. DNS SRV query _sip._tls.domain.com
- C. DNS SRV query _sip._tcp.domain.com
- D. DNS SRV query _cisco-uds._tcp.domain.com
Answer: D
NEW QUESTION 60
Refer to the exhibit.
When troubleshooting an internal Jabber login problem, there is a pop-up about a certificate error, and then the login fails The FQDN of Cisco UCM is cucm.ex.com. and the FODN of the IM and Presence Server is imp.ex.com. Which two actions should be taken to fix this issue? (Choose two.)
- A. Import the Cisco UCM CallManager certificate into the Trusted Certificate Authorities on the PC running Jabber
- B. Import the certificate of cucm.ex.com into the Trusted Certificate Authorities on the PC running Jabber.
- C. Sign the Cisco Untried IM and Presence server certificate with trusted a trusted
- D. Sign the Cisco UCM tomcat certificate with a trusted certificate authority.
- E. Sign the Cisco UCM CallManager certificate with a trusted certificate authority.
Answer: B,E
NEW QUESTION 61
Which DNS record is used for on-premises service by Jabber clients?
- A. <tftp server FQDN> A record
- B. _cisco-uds._tls.<domain> SRV record
- C. _collab-edge._tcp.<domain> SRV record
- D. _cisco-uds._tcp.<domain> SRV record
Answer: D
NEW QUESTION 62
Drag and drop the steps for SAML SSO authentication from the left into the order on the right.
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/SAML_SSO_deployment_guide/12_5_1/cucm_b_saml-sso-deployment-guide-12_5/cucm_b_saml-sso-deployment-guide-12_5_chapter_01.html
NEW QUESTION 63
Refer to Exhibit.
An engineer is troubleshooting operation performance in the network. Which account should be taken to restore high availability in the sub cluster?
- A. Start all critical services on the second node, and select the Fallback button in the "Presence Redundancy Group Configuration"
- B. Start all critical services on both nodes and select "rebalance users" in the "Presence User Assignment"
- C. Go to "Presence Redundancy Group Configuration" on the Cisco UCM Administration page and select the Fallback button.
- D. Go to "Presence User Agreement" on the Cisco UCM Administration page and select "rebalance users" for all users.
Answer: A
NEW QUESTION 64
Refer to the exhibit.
A collaboration engineer has integrated Cisco Unity Express with Cisco Unified Communications Manager Express and is experimenting with the MWI feature. With the current configuration, no MWI change occurs when leaving new messages or after playing new messages. Which two changes are needed to correct the configuration? (Choose two.)
- A. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.254 expires 3600 port 5060 transport udp - B. ccn subsystem sip
mwi sip outcall - C. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport udp unsolicited - D. ccn subsystem sip
mwi sub-notify - E. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport tcp notify - F. ccn subsystem sip
mwi envelop-info
Answer: A,F
NEW QUESTION 65
......
Dumps Brief Outline Of The 300-810 Exam: https://www.dumpstillvalid.com/300-810-prep4sure-review.html
300-810 Training & Certification Get Latest CCNP Collaboration : https://drive.google.com/open?id=1UM9-Yeq-odeJ0033WvCa3DQyp1NSNzlk
