[2022] JN0-1362 Exam Dumps, Test Engine Practice Test Questions
Pass JN0-1362 exam [Jan 02, 2022] Updated 130 Questions
NEW QUESTION 20
What are two network management benefits of using devices in your design proposals?
- A. Virtualization can lower costs because there are fewer physical devices that need to be purchased and managed.
- B. Virtualization allows network administrators to dynamically make configuration changes to all network devices.
- C. Virtualization allows network administrators to dynamically add and remove services being provided
- D. Virtualization can increase the available network bandwidth because their interface speeds are only limited by the host device.
Answer: A,C
NEW QUESTION 21
You are asked to design a Cloud CPE solution that can dynamically add new sites to an existing MPLS Layer 3 VPN. The CPE for each new site must support the service chaining of multiple VNFs.
Which Juniper Networks Cloud CPE solution supports these requirements?
- A. SD-WAN
- B. Centralized Cloud CPE
- C. Distributed Cloud CPE - Managed Internet
- D. Distributed Cloud CPE - Option 1
Answer: D
NEW QUESTION 22
Your customer is deploying a large number of Juniper WAN edge devices spread across several remote locations. The customer wants to create an isolated out-of-band management network where these devices can be securely accessed and managed using the CLI and, where possible, the WebUI Which two statements will satisfy the customer's requirements'? (Choose two)
- A. Implement a management configuration group on all WAN edge devices.
- B. Enable the SSH and HTTPS services on each WAN edge device
- C. Place all management interfaces on a common Layer 2 network
- D. Ensure the devices are running the FIPS version of the Junos OS.
Answer: B,D
NEW QUESTION 23
What are two considerations for using the public Internet for WAN connectivity? (Choose two.)
- A. It is inherently insecure, and additional encryption should be considered.
- B. End-to-end traffic is best effort.
- C. It is inherently secure and does not require additional encryption.
- D. End-to-end CoS and larger MTU are possible.
Answer: A,D
NEW QUESTION 24
You are asked to create a point-to-multipoint DCI that does not overwhelm the data plane with MAC learning traffic.
Which protocol would you use in this situation?
- A. EVPN
- B. VPLS
- C. PPTP
- D. pseudowire
Answer: B
NEW QUESTION 25
Your organization expenenced a man-in-the-middle attack and must protect against future attacks.
In this scenario, what must you do to protect your network?
- A. Implement flowspec
- B. Implement destination-based RTBH
- C. Implement MACsec.
- D. Implement EVPN
Answer: D
NEW QUESTION 26
You work for a service provider that currently uses a full mesh of IBGP peers to share EBGP routes. You are concerned about future scalability with this model and have decided to use route reflectors to overcome the scale limitations associated with the full mesh model.
In this scenario, which statement is true?
- A. Route reflectors do not change existing IBGP next hops by default.
- B. Cluster IDs must be configured on all IBGP peers.
- C. Private autonomous system numbers must be configured on all IBGP peers.
- D. Route reflectors readvertise both the active and backup routes
Answer: C
NEW QUESTION 27
What are three components of a class-of-service scheduler? (Choose three.)
- A. transmit rate
- B. queue priority
- C. policing rate
- D. forwarding class
- E. delay buffer size
Answer: A,B,E
Explanation:
Junos OS schedulers allow you to define the priority, bandwidth, delay buffer size, rate control status, and RED drop profiles to be applied to a particular queue for packet transmission
NEW QUESTION 28
You want to implement Source Packet Routing in Networking (SPRING) in your network core using MPLS as the data plane for traffic engineering purposes.
In this scenario what are two protocols that would be used to distribute the segment IDs? (Choose two )
- A. LDP
- B. IS-IS
- C. OSPF
- D. RSVP
Answer: B,C
NEW QUESTION 29
You work for a service provider who wants to provide a service to your customers consisting of VoIP, live TV, video on demand (VoD), and data services You want to use a hybnd VLAN model for this service Which VLAN assignments would be used for this deployment?
- A. Live TV will be multicast to all customers, video on demand, voice, and data will share a customer specific VLAN.
- B. Live TV and VoD will be in the same shared VLAN with Live TV on a multicast stream and VoD unicast, voice and data will reside in a customer specific VLAN.
- C. Video services will reside in a shared video VLAN. and the customer willHjttlttjftvo data VLANs assigned, one for voice and one for data.
- D. Live TV will be multicast to all customers, video on demand and data will share a customer specific VLAN, VoIP will use a shared VLAN utilizing private VLANs to talk to a telephony server.
Answer: D
NEW QUESTION 30
What are two ways to provider redundancy in a WAN design to address physical failures? (Choose two.)
- A. Select products with different types of MICs.
- B. Select products that use multiple Routing Engines.
- C. Select products that use MC-LAG.
- D. Select products with different versions of firmware.
Answer: A,D
NEW QUESTION 31
You are responding to an RFP for a services provider that wants to upgrade their MPLS/LDP network to use traffic engineering.
Which two statements are correct in this scenario? (Choose two )
- A. Segment routing uses LDP for label adjacency making it backward-compatible with LDP.
- B. RSVP-TE requires a controller for bandwidth reservations.
- C. Segment routing requires a controller for bandwidth reservations
- D. RSVP-TE creates session states on core routers.
Answer: C,D
NEW QUESTION 32
Your customer wants to use NorthStar to communicate with network devices and acquire the MPLS topology.
Which protocol is recommended for this purpose?
- A. OSPF
- B. BGP-LS
- C. ISIS
- D. PIM-SSM
Answer: B
NEW QUESTION 33
You are designing a new deployment of Paragon Pathfinder (formerly known as NorthStar). You are asked to ensure that LSPs can be created only from Paragon Pathfinder itself.
What will accomplish this task?
- A. PCC initiated
- B. PCC delegated
- C. PCE initiated
- D. PCE delegated
Answer: D
NEW QUESTION 34
You are asked to prepare a design proposal for a new enterprise customer. You must ensure that all traffic is routed through and inspected by an SRX Series device located at the corporate headquarters.
In this scenario which solution should be used?
- A. Use a hub-and-spoke Layer 3 VPN solution
- B. Use a Junos Fusion Enterprise solution
- C. Use a full mesh SD-WAN solution
- D. Use a full mesh Layer 3 VPN solution
Answer: A
NEW QUESTION 35
Exhibit.
You are asked to design a solution that will provision a circuit from the corporate headquarters to a remote branch. The circuit must be secure, and must support IGP adjacencies. IPsec has been chosen to secure traffic across the WAN connection.
Referring to the exhibit which statement describes another requirement for this circuit to function correctly?
- A. You must use a service provider Layer 2 VPN to establish routing protocols across the circuit.
- B. You must increase the MTU of the IPsec tunnel to more than 1500 bytes to allow routing updates across the circuit.
- C. You must use a service provider Layer 3 VPN to establish routing protocols across the circuit
- D. You must implement GRE over IPsec to establish routing protocols across the circuit.
Answer: D
NEW QUESTION 36
You are asked to provide a design proposal for a services provider's core network. The network consists of both IPv2 and IPv4 addresses and must scale up to 50 core routing devices. As part of your design, you must in redundancy and ensure that future network expansion is easily incorporated.
In this scenario, which statement is correct regarding the BGP design?
- A. You must separate the BGP network into multiple autonomous systems on geographic location.
- B. You must use direct interface peering for your neighbors.
- C. You should create a full mesh of EBGP neighbors in your core.
- D. You should use a pair of route reflectors with peering's to all other core devices.
Answer: D
NEW QUESTION 37
You are designing several MPLS virtual routing and forwarding (VRF) instances on all provider edge (PE) routers. Routes within each VRF should be exchanged between all PE routers provisioned for that VRF.
For each VRF routing instance which two attributes must match on all related PE routers? (Choose two )
- A. interfaces
- B. VRF target
- C. router ID
- D. instance type
Answer: B,D
NEW QUESTION 38
Exhibit.
Within ISP E, R1 is load-balancing traffic destined to ISP D over the R1-R2-R5 and R1-R4-R5 paths. At some point, a link degradation event occurs in the network as shown in the exhibit. You want R1 to rapidly learn of the path failure.
- A. Enable Bidirectional Forwarding Detection between R1 and R4.
- B. Adjust the OSPF hello timer to a subsecond value between R4 and R5.
- C. Adjust the OSPF hello timer to a subsecond value between R1 and R4.
- D. Enable Bidirectional Forwarding Detection between R4 and R5.
Answer: D
NEW QUESTION 39
Your customer requires virtual machine mobility between two data centers, and they are pursuing a managed service.
Which solution would satisfy the customer's requirement?
- A. an IPsec VPN service between CE routers
- B. a routed service
- C. an L3VPN service
- D. an EVPN service provided over IP
Answer: C
NEW QUESTION 40
You are designing a full mesh of connections between multiple enterprise In this scenario, which two statements are correct? (Choose two.)
- A. All sites are able to communicate directly with each other
- B. Security and Internet control is applied at a central location
- C. IPsec tunnels can be used to secure traffic between sites.
- D. It is easier for administrators to enforce application-aware services with a single point of management.
Answer: A,B
NEW QUESTION 41
A customer reports that their RSVP LSP deployment faces scaling challenges as their network grows. You are asked to propose ways that the network can be optimized.
What are two ways that Paragon Pathfinder (formerly known as NorthStar) helps achieve this optimization? (Choose two.)
- A. offloading control plane state to a central controller
- B. creation of LSPs across different IGP areas
- C. faster detection of LSP failure
- D. reduction in LSPs due to optimal path selection
Answer: A,C
NEW QUESTION 42
Which two statements are correct about Junos Space Connectivity Services Director? (Choose two)
- A. It is used to design, provision, and deploy MPLS-dynamic, RSVP-signaled LSP, and static LSP services on devices.
- B. It is used to design, provision, and monitor Label Discovery Protocol (LDP) and Border Gateway Protocol (BGP) services on devices
- C. It is used to provide zero touch provisioning (ZTP), which simplifies the deployment of networks by providing policy-driven plug-and-play provisioning and network bring-up operations.
- D. It is used to design and simulate MPLS-TE and LSP routing.
Answer: A,C
NEW QUESTION 43
......
Juniper JN0-1362 Real 2022 Braindumps Mock Exam Dumps: https://www.dumpstillvalid.com/JN0-1362-prep4sure-review.html
