[2022] 300-430 Answers 300-430 Free Demo Are Based On The Real Exam
300-430 [Jan-2022 Newly Released] Exam Questions For You To Pass
There are eight topics of interest for the Cisco 300-430 exam. They represent the content that the test is most likely to include. Alongside the weighted percentages, here is more comprehensive coverage of the objectives:
- Device Hardening (10%)
This is the final domain of the Cisco 300-430 exam. You should know how to implement access controls for devices, including TACAS+ and RADIUS. Another thing is executing authentication of access points such as 802.1X. Another subtopic is concerning the implementation of CPU ACLs upon the controller.
- Advanced Location Services (10%)
In this section, the learners will know everything about the implementation of CMX components. This included Detect and Locate, analytics, and presence services. There is also implementing location-based guest services by utilizing a custom portal as well as Facebook Wi-Fi. What follows is troubleshooting the accuracy of a location with Cisco Hyperlocation. It also concerns troubleshooting high availability for CMX and implementing wIPS with the use of MSE.
- Multicast (10%)
In this topic, there are five key areas. They include implementing multicast components, describing the effect of multicast on wireless networks, and implementing multicast on WLAN. Others are executing mDNS and Multicast Direct.
- Security for Wireless Client Connectivity (20%)
This objective is about configuring the clients’ profiling on ISE and WLC. Next, it concerns implementing BYOD as well as guests and includes CWA utilizing ISE, LWA with WLC or ISE, provisioning of native supplication using ISE, provisioning of a certificate on a controller, and executing 802.1X in addition to AAA on varied wireless infrastructures and ISE. The last issue concerns executing networking that is identity-based on varying wireless infrastructures, such as QoS, VLANs, and ACLS.
- Monitoring (15%)
This topic area is about utilizing reports concerning PI and Data Center for Cisco. It is also about managing alarms as well as rogues like APs in addition to the clients. WLC, PI, and Cisco Data Center are the technologies you should know as well. Moreover, the candidates must familiarize themselves with managing RF Interferers. Another field is on troubleshooting client connectivity where it involves WLC, ISE, PI, and Cisco’s Data Center as well.
- QoS on a Wireless Network (10%)
This objective takes care of four areas of capabilities that are all critical to wireless networks. The first one is on implementing QoS schemes while considering the requirements, which can include wired-based to wireless-based mapping. The next one encompasses implementing QoS targeted at the wireless clients. The final portion is on executing AVC that includes Fastlane (and this is only on WLC).
- FlexConnenct (15%)
This domain is significant to supporting the learners in skills such as deploying components of FlexConnect that include switching and modes of operation. It also extends to deploying FlexConenct capabilities, for example, roaming and groups, fault tolerance and split tunnelling, Flex ACL and central switching, which is VLAN-based. Other aspects of this subject concern upgrading smart AP image and implementing Office Extend.
- Location Services (10%)
This area involves deploying MSE in addition to CMX on a network that is wireless-based. It also has to do with implementing location services where it encompasses client tracking, RFID tags (only tracking), inteferers, rogue APs, and clients.
NEW QUESTION 46
An engineer configured a Cisco AireOS controller with two TACACS+ servers. The engineer notices that when the primary TACACS+ server fails, the WLC starts using the secondary server as expected, but the WLC does not use the primary server again until the secondary server fails or the controller is rebooted. Which cause of this issue is true?
- A. Fallback is enabled
- B. DNS query is disabled
- C. Fallback is disabled
- D. DNS query is enabled
Answer: C
Explanation:
NEW QUESTION 47
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?
- A. Change the WLAN reserved bandwidth for WebEx
- B. Create an ACL for WebEx
- C. Create an AVC profile for WebEx
- D. Change the AVC application WebEx-app-sharing to mark
Answer: C
NEW QUESTION 48
An engineer is following the proper upgrade path to upgrade a Cisco AireOS WLC from version 7.3 to 8.9.
Which two ACLs for Cisco CWA must be configured when upgrading from the specified codes? (Choose two.)
- A. Permit 0.0.0.0 0.0.0.0 any DNS any
- B. Permit any any any
- C. Permit 0.0.0.0 0.0.0.0 UDP any DNS
- D. Permit 0.0.0.0 0.0.0.0 UDP DNS any
- E. Permit 0.0.0.0 0.0.0.0 UDP any any
Answer: C,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html
NEW QUESTION 49
Which three things do you need to consider prior to performing a wireless site survey? (Choose three.)
- A. The time required to survey each potential AP location.
- B. The time required to assess customer WLAN density and throughput requirements.
- C. The time required to assess application server locations at the customer facility.
- D. The time required to acquire any additional infrastructure components.
- E. The type of wireless survey tools required to perform the site survey.
- F. The time required to utilize the design mode in Cisco WCS to prepare a preliminary WLAN design to reduce on-site survey time.
Answer: A,B,E
NEW QUESTION 50
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?
- A. 7 days
- B. 3 days
- C. 3 hours
- D. 24 hours
Answer: A
Explanation:
Explanation
(7 Days is the max, you can select
NEW QUESTION 51
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation/Reference:
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/technology/roguedetection_deploy/ Rogue_Detection.html
NEW QUESTION 52
Refer to the exhibit.
An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?
- A. rogue AP with SSlD admin seen for 4000 seconds and heard at -70 dBm
- B. rogue AP with SSlD admin seen for 4000 seconds and heard at -60 dBm
- C. rogue AP with SSID admin seen for 3000 seconds and heard at -60 dBm
- D. rogue AP with SSID admin seen for 3000 seconds and heard at -70 dBm
Answer: A
Explanation:
NEW QUESTION 53
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. Static WEP
- B. WPA+WPA2
- C. 802.1X
- D. CKIP
- E. Static WEP + 802.1X
Answer: A,B
Explanation:
NEW QUESTION 54
What is the difference between PIM sparse mode and PIM dense mode?
- A. Sparse mode uses distribution trees. Dense mode floods.
- B. Sparse mode supports multiswitch networks. Dense mode supports only one switch.
- C. Sparse mode floods. Dense mode uses distribution trees.
- D. Sparse mode supports only one switch. Dense mode supports multiswitch networks.
Answer: A
NEW QUESTION 55
During the EAP process and specifically related to the client authentication session, which encrypted key is sent from the RADIUS server to the access point?
- A. shared-secret key
- B. WPA key
- C. encryption key
- D. session key
Answer: D
NEW QUESTION 56
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?
- A. FlexConned mode with central switching enabled
- B. FlexConnect mode with OfficeExtend enabled
- C. FlexConnect mode with local authentication
- D. FlexConnect mode with central authentication
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp12
NEW QUESTION 57
A wireless network engineer must present a list of all rogue APs with a high severity score to senior management. Which report must be created in Cisco Prime Infrastructure to provide this information?
- A. Rogue APs
- B. Rogue AP Count Summary
- C. Rogue AP Events
- D. New Rogue APs
Answer: C
NEW QUESTION 58
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which Ap mode and submode must be implemented?
- A. Ap mode: local, Ap submode: none
- B. Ap mode: local, Ap submode: WIPS
- C. Ap mode: monitor, Ap submode: WIPS
- D. Ap mode: monitor, Ap submode: none
Answer: A
Explanation:
NEW QUESTION 59
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?
- A. FlexConned mode with central switching enabled
- B. FlexConnect mode with local authentication
- C. FlexConnect mode with OfficeExtend enabled
- D. FlexConnect mode with central authentication
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp12
NEW QUESTION 60
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?
- A. Policy Profile
- B. RF Profile
- C. Flex Profile
- D. AP Join Profile
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/cisco-hyperlocation.html
NEW QUESTION 61
Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?
- A. Cisco Connected Mobile Experiences
- B. Cisco Hyperlocation Module
- C. Wireless Intrusion Prevention System
- D. Cisco Mobility Services Engine
Answer: B
Explanation:
NEW QUESTION 62
A corporation has recently implemented a BYOD policy at their HQ. Which two risks should the security director be concerned about? (Choose two.)
- A. malware
- B. lost and stolen devices
- C. unauthorized users
- D. keyloggers
- E. network analyzers
Answer: A,B
Explanation:
https://ccbtechnology.com/byod-5-biggest-security-risks/
https://blogs.cisco.com/security/byod-many-call-it-bring-your-own-malware-byom
NEW QUESTION 63
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?
- A. FlexConned mode with central switching enabled
- B. FlexConnect mode with OfficeExtend enabled
- C. FlexConnect mode with local authentication
- D. FlexConnect mode with central authentication
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp12
NEW QUESTION 64
An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets received, and then have the differentiated services code point set to match when it is resent to another port on the switch. Which configuration is required in the network?
- A. mls qos trust cos configured on the controller switch port
- B. mls qos trust dscp configured on the controller switch port
- C. WMM set to required on the WLAN
- D. Platinum QoS configured on the WLAN
Answer: B
Explanation:
NEW QUESTION 65
Refer to the exhibit.
An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the network. Based on the local EAP debug controller provided, why is the client unable to connect?
- A. The Cisco WLC local EAP profile is misconfigured
- B. The user is using invalid credentials.
- C. The Cisco WLC is configured for the incorrect date.
- D. The client is falling to accept certificate.
Answer: B
NEW QUESTION 66
On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that FlexConnect local switching is enabled, which setting is causing this behavior?
- A. ISE NAC is enabled
- B. Client Exclusion is enabled
- C. 802.11r Fast Transition is enabled
- D. FlexConnect Local Auth is disabled
Answer: D
Explanation:
NEW QUESTION 67
......
New 2022 Realistic Free Cisco 300-430 Exam Dump Questions & Answer: https://www.dumpstillvalid.com/300-430-prep4sure-review.html
Cisco 300-430 Exam: Basic Questions With Answers: https://drive.google.com/open?id=1DuAkOalBCn5yWjAGStR7N1FZFIoKVk0T
