[Nov-2025] Latest Supermicro SMI300XE Certification Practice Test Questions
Verified SMI300XE Dumps Q&As - 1 Year Free & Quickly Updates
NEW QUESTION # 16
What information is shown in the IPMI storage monitoring section?
- A. Overheating issues
- B. The motherboard
- C. Severity of health events
- D. Attached storage devices
Answer: D
Explanation:
TheIPMI storage monitoring sectionprovides information aboutattached storage devices.
* Option A (Incorrect):IPMI doesnot display motherboard detailsin this section.
* Option B (Incorrect):Overheating issuesare logged separatelyin the event logs.
* Option C (Correct):IPMI storage monitoring tracks attached storage devices.
* Option D (Incorrect):Severity of health eventsis found in system logs, not storage monitoring.
NEW QUESTION # 17
Which SUM command is used to check basic system information?
- A. sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
- B. sum.exe call system information
- C. sum.exe -ip 10.1.1.100 -user ADMIN -pass ADMIN -command checksysteminfo
- D. sum.exe -I 10.1.1.100 -u ADMIN -p ADMIN -c checkassetinfo
Answer: A
Explanation:
TheSUM (Supermicro Update Manager) command to check basic system informationis:
css
CopyEdit
sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
* Option A (Correct):This is the correct syntax for retrievingbasic system information using SUM.
* Option B (Incorrect):The syntaxis incorrect and will not execute properly.
* Option C (Incorrect):The"checksysteminfo" command is not validin SUM.
* Option D (Incorrect):"checkassetinfo"retrieves system asset details, not basic system information.
NEW QUESTION # 18
When removing the GPU tray, where are the two screws located that must be loosened to allow the handles to be pulled out/down?
- A. Top of the GPU tray
- B. One on top and one on bottom of the GPU tray
- C. Bottom of the GPU tray
- D. One on each side of the GPU tray
Answer: D
Explanation:
Toremove the GPU tray, you need toloosen two screwslocatedone on each side of the tray.
* Option B (Correct):There isone screw on each sidethat must beloosenedbefore pulling the handles out
/down.
* Option A (Incorrect):The screwsare not only on the top.
* Option C (Incorrect):The screwsare not only on the bottom.
* Option D (Incorrect):Thereis no screw configurationwithone on top and one on the bottom.
NEW QUESTION # 19
Which SUM command is used to verify the AOC NIC installed on the system?
- A. sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocnicinfo
- B. sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocinfo
- C. sum.exe-read all AOC-from 10.1.1.100
- D. sum.exe -ip 10.1.1.100 -user ADMIN -pass ADMIN -command getnicinfo
Answer: B
Explanation:
Toverify the AOC NIC installedon the system, the correctSUM (Supermicro Update Manager) command is:
css
CopyEdit
sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocinfo
* Option B (Correct):This command retrievesAOC NIC information.
* Option A (Incorrect):"getaocnicinfo" isnot a valid command.
* Option C (Incorrect):This syntax isincorrect and will not execute properly.
* Option D (Incorrect):"getnicinfo" retrievesgeneral NIC details, not AOC NIC-specific information.
NEW QUESTION # 20
The syntax and options for the SUM command differ between Windows and Linux.
- A. False
- B. True
Answer: B
Explanation:
TheSUM (Supermicro Update Manager) commandhas differentsyntax and optionsbetweenWindows and Linuxversions.
* OnWindows, the SUM command uses .exe files and standard Windows CLI syntax.
* OnLinux, SUM commands use native Linux paths, shell scripting, and different argument formatting.
For example:
* Windows:sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
* Linux:./sum -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
Since syntax differs,the correct answer is True.
NEW QUESTION # 21
What is the correct syntax for the AGFHC command to run recipes?
- A. ./agchf-r alljvll.yml
- B. agfhc.exe -r-s alljvll.yml
- C. /agfhc -t -a alljvll.yml
- D. ./agfhc -r alljvll.yml
Answer: D
Explanation:
The correct syntax for running recipes using theAGFHC toolis:
bash
CopyEdit
/agfhc -r alljvll.yml
This command runsa specified YAML recipe file (alljvll.yml)using the AGFHC tool in aLinux-based system.
* Option A (Incorrect):Contains an incorrect flag (-r should be separated).
* Option B (Incorrect):Uses incorrect flag format (-t -a), which is not part of AGFHC syntax.
* Option C (Incorrect):Uses Windows-style .exe format, which is incorrect for Linux.
* Option D (Correct):This follows thecorrect AGFHC syntaxfor running recipes in a Linux environment.
NEW QUESTION # 22
How many GPUs can be missing or undetected by the system to successfully execute the ROCm software commands?
- A. None
- B. 0
- C. 1
- D. 2
Answer: B
Explanation:
The ROCm softwarerequires at least one GPU to function. It can stilloperate with up to 2 missing GPUs, butif 3 or more GPUs are missing, ROCm commands will fail.
* Option A (Incorrect):ROCmfails if 3 GPUs are missing.
* Option B (Incorrect):The software can function withmore than 1 GPU missing.
* Option C (Correct):ROCmcan still execute commands if only 1 or 2 GPUs are missing.
* Option D (Incorrect):At least 1 GPUmust be detected for ROCm to work.
NEW QUESTION # 23
What information is useful for identifying system issues and their timing?
- A. GPU memory specification
- B. Event log
- C. Last login attempt
- D. Subnet Mask
Answer: B
Explanation:
Theevent logis the primary source of information for identifyingsystem issues and their exact timing. The IPMI event logrecords all critical system alerts, includinghardware failures, temperature warnings, power issues, and other critical errors.
* Option A (Incorrect):GPU memory specifications do not provide issue tracking information.
* Option B (Correct):Theevent log tracks all system events and errors, making it essential for troubleshooting.
* Option C (Incorrect):Subnet masks relate to network configurations and do not provide system issue tracking.
* Option D (Incorrect):Last login attempts show security logs but arenot related to hardware or system issues.
NEW QUESTION # 24
When working on the GPU tray, where should you place it to ensure a safe work environment?
- A. On the floor where everyone is walking by
- B. A flat surface
- C. On a cardboard box that may or may not support the weight of the tray
- D. On top of the chassis
Answer: B
Explanation:
When handling theGPU tray, it should be placed ona flat, stable surfacetoprevent damage and ensure safety.
* Option B (Correct):Aflat surfaceprovides stability and preventsaccidental damage or tipping.
* Option A (Incorrect):Placing the trayon top of the chassiscan cause it tofall and sustain damage.
* Option C (Incorrect):Thefloor is unsafedue tofoot traffic, riskingaccidental damage.
* Option D (Incorrect):Acardboard box may not support the tray's weight, making itunstable.
NEW QUESTION # 25
Which of the following are important safety precautions when removing the GPU tray?
- A. Unnecessary movement can damage the fans below the GPU tray.
- B. For your own safety, and the safety of the system, two people should remove the tray which weighs more than 70 pounds.
- C. All of the above.
- D. Keep the tray straight to prevent it from tilting up or down, which can damage the upper and lower portion of the chassis.
Answer: C
Explanation:
Whenremoving the GPU trayin anMI300X system, the following precautions must be taken:
* Two people should remove the trayas itweighs over 70 pounds, making it unsafe for one person to handle.
* Keeping the tray straightprevents it fromtilting, which candamage the chassis components.
* Unnecessary movement can damage cooling fansdirectly beneath the GPU tray.
Since all the above precautions arecritical for safe removal, thecorrect answer is D (All of the above).
NEW QUESTION # 26
When you first access the IPMI Web GUI, you will be prompted to log in. Where can you find the password?
- A. It will be on the tag next to the I/O Module.
- B. Use the system model number as the password.
- C. It will be on the label on the bottom side of the system cover.
- D. It will be on the label on the bottom of the system.
Answer: C
Explanation:
Supermicro ships systems with aunique BMC passwordfor security purposes. Thispassword is printed on a label located on the bottom side of the system cover.
* Option A (on the I/O module tag)is incorrect as the tag typically containsnetwork interface informationrather than credentials.
* Option B (using the system model number as a password)is incorrect because Supermicrodoes not use default passwords based on the model number.
* Option C (on the bottom of the system)is close but not precise;the correct location is the bottom side of the system cover.
* Option D (label on the bottom side of the system cover)is correct, as stated in theSupermicro IPMI and BMC login documentation.
Security Recommendation:Upon first login,Supermicro strongly recommends changing the default BMC password immediatelyfor security reasons.
NEW QUESTION # 27
What is the main purpose of the AGFHC software tool?
- A. The AGFHC tool is used to diagnose and stress test components on the MI300X. This will help identify and validate component issues.
- B. The AGFHC tool is used to support other platforms such as Mac OS and Windows so they can all share GPU system resources.
- C. The AGFHC tool is used to update firmware and BIOS on the GPU to ensure that it is up to datewith the latest code.
- D. The AGFHC tool is used for checking support phone numbers and emails for AMD GPU support staff who should be the first point of contact for any issues related to AMD GPUs.
Answer: A
Explanation:
TheAGFHC toolis designed todiagnose and stress test system componentsin theMI300X platform, helping identify faultsin GPUs, CPUs, and system hardware.
* Option A (Correct):AGFHC isused for diagnostics and stress testing.
* Option B (Incorrect):The tool doesnot enable cross-platform GPU resource sharing.
* Option C (Incorrect):While itinteracts with firmware, it doesnot update BIOS.
* Option D (Incorrect):The tool isnot a support contact directory.
NEW QUESTION # 28
If a GPU is not detected in the IPMI GUI reports, what would be the next step to recover the missing GPU?
- A. Turn off the server, then try reseating the GPU and heatsink, turn on the server, and verify in IPMI GUI that the GPU has returned.
- B. Press the GPU button on the rear of the server for 5 seconds to reinitialize the GPU tray.
- C. While powered on, remove the GPU tray, and remove all power connectors and fan connectors from the baseboard and then reseat the connectors.
- D. Turn off the server and reseat the motherboard tray.
Answer: A
Explanation:
When a GPU is not detected in theIPMI GUI reports, the recommended recovery method is topower off the system, reseat the GPU and heatsink, then power it back on and check the IPMI GUI for detection. This process ensures that the GPU is properly connected and making full contact with the system board.
* Option A (pressing a GPU button for 5 seconds)is incorrect because there is no dedicated reinitialization button for GPU detection in Supermicro MI300X systems.
* Option B (removing the GPU tray while powered on)is not advisable as it could cause damage to components.
* Option D (reseating the motherboard tray)is unnecessary, as the issue is likely limited to GPU connectivity rather than a full system board issue.
* Option C (powering off the system, reseating the GPU, and verifying in IPMI GUI)follows proper troubleshooting guidelines as documented in Supermicro'stroubleshooting and system health monitoring sections.
NEW QUESTION # 29
......
Latest 2025 Realistic Verified SMI300XE Dumps - 100% Free SMI300XE Exam Dumps: https://www.dumpstillvalid.com/SMI300XE-prep4sure-review.html
Get 2025 Updated Free Supermicro SMI300XE Exam Questions and Answer: https://drive.google.com/open?id=106nxgvXhK2jpjDXyGkUcSR3C08dmArIe
