[Dec-2025] A10 Networks A10-System-Administration Dumps – Reduce Your Chance of Failure in A10-System-Administration Exam
To help you achieve your ultimate goal, we suggest the actual A10 Networks A10-System-Administration dumps for your A10 Certified Professional System Administration 4 exam preparation to use as your guideline.
NEW QUESTION # 16
Which commands display the ACOS device serial number? (Choose two.)
- A. show environment
- B. show version
- C. show serial
- D. show system
- E. show hardware
Answer: B,E
NEW QUESTION # 17
Which statement correctly describes the following configuration?
snmp enable traps slb-change server
snmp enable traps slb-change server-port
snmp enable traps slb-change vip
snmp enable traps slb-change vip-port
- A. These commands enable SNMP traps for any SLB changes
- B. These commands enable SNMP traps for only SLB changes related to real-servers
- C. These commands enable SNMP traps for only SLB changes related to virtual-server
- D. These commands only enable SNMP traps for the creation or removal of virtual and real servers and ports
Answer: D
NEW QUESTION # 18
Which VRID priority scheme will implement an Active-Active-Active VRRP-A deployment with three ACOS devices?
- A. 0
- B. 1
- C. 2
Answer: B
NEW QUESTION # 19
What do we know about the state of the system from the CLI prompt? (Choose two.) A1-vMaster[1/1][Helium2]#
- A. There are at least 2 private partitions configured.
- B. There is only 1 member in this A10 Virtual Chassis.
- C. aVCS has been configured, and this host is part of aVCS set 1.
- D. Application Delivery Partitions have been configured.
- E. aVCS has been configured, and this host is part of aVCS set 1/1.
Answer: D,E
NEW QUESTION # 20
In the following configuration:
Where network 3.0.0.x on each device is on a VE interface dedicated to aVCS traffic, what must you do to ensure that command "device-context x" always succeeds?
- A. Enable management service ssh on that interface for each device.
- B. Verify the interface is untagged on each device.
- C. Configure vcs floating-ip on network 3.0.0.0 /24.
- D. Apply acl "permit 3.0.0.0 /24" on that interface for each device.
Answer: C
NEW QUESTION # 21
In a VRRP-A topology that contains four devices, select the number of devices on which a single VRID can be simultaneously active?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 22
The "show admin" displays the following output. Select the correct statements concerning admins on this device. (Choose two.)
- A. Sally is a read write administrator on the shared partition.
- B. User admin has no access to the acme partition.
- C. Fred can run aXAPI scripts against the acme partition using his login information.
- D. Sally can only log in with the web client.
- E. Fred is a read write administrator on the Acme partition.
- F. Sally is a read write administrator on the Acme partition.
- G. Fred can only log in with the web or api client.
Answer: F,G
NEW QUESTION # 23
You are planning an Active-Active-Active VRRP-A three-device deployment that, upon failover of any device, distributes the load from a single device to both standby devices simultaneously. How many VRIDs are required?
- A. VRID Default is enough
- B. 0
- C. 1
- D. 2
- E. 3
- F. 4
Answer: E
NEW QUESTION # 24
Which statement correctly describes the result of the following commands?
ACOS(config)#logging host 192.168.216.45
ACOs(config)#end
ACOS#active-partition p1
Currently active partition: p1
ACOS[p1](config)#logging host 2.2.2.2
ACOS[p1](config)#logging host partition shared
- A. System logs generated from partition "p1" will be sent to logging server "2.2.2.2".
- B. System logs generated from partition "p1" will be sent to the shared logging server's "192.168.216.45".
- C. System logs generated from partition "p1" will be sent to logging server "2.2.2.2", as well as to the shared logging server's "192.168.216.45".
- D. System logs generated from partition "p1" will be sent to logging server "2.2.2.2", and only warning severity log messages are sent to the shared logging server's "192.168.216.45".
Answer: C
NEW QUESTION # 25
What information is typically submitted with every aXAPI call after the initial login is complete?
- A. Authorization header with signature
- B. Log file location
- C. The ACOS device serial number
- D. The programming language being used
- E. The AXAPI special permission XML file
Answer: A
NEW QUESTION # 26
Describe VRRP-A (high availability) and aVCS interoperability.
- A. Enabling VRRP-A requires that aVCS is operational
- B. VRRP-A and aVCS must function simultaneously
- C. Enabling aVCS require VRRP-A is operational
- D. VRRP-A and aVCS operate independently of each other
Answer: B
NEW QUESTION # 27
Select the statement that describes aXAPI authentication and authorization requirements:
- A. aXAPI requires that users are assigned to the "aXAPI" role before they can execute a script.
- B. aXAPI has special permissions that differ from CLI and GUI permissions.
- C. aXAPI is subject to the same permissions requirements as the CLI and GUI.
- D. aXAPI is subject to authorization but not authentication requirements.
Answer: B
NEW QUESTION # 28
......
Accurate & Verified Answers As Seen in the Real Exam here: https://www.dumpstillvalid.com/A10-System-Administration-prep4sure-review.html
