When it comes to the 600-212 exam test, I believe that you must have many words to complain: the actual exam is difficult and the test is disgusting and the preparation is not effective. When you pay attention to this page, it is advisable for you to choose 600-212 valid training material. The 600-212 valid questions & answers are authentic and latest, helping you to enjoy a boost up in your professional career path, also making you easy to materialize your dreams.
Valid & reliable for 600-212 exam dumps
When facing the 600-212 exam test, you must not have a clue where to look for help and don't know which books to buy & which resources is reliable to use. As the coming time of 600-212 exam, you have wasted so much time on searching for the valid reference, but you are still desperately looking for it. Now, please be calm, the Cisco Specialist 600-212 valid exam dumps will bring you to the illuminated places. We know that time and efficiency are important for your preparation, so the validity and reliability are especially important. 600-212 Implementing Cisco Service Provider Mobility LTE Networks (SPLTE) free demo are available for all the visitors, you can download any of the version to have an attempt, may be you will find some similar questions in your last actual test.
600-212 Implementing Cisco Service Provider Mobility LTE Networks (SPLTE) valid exam questions & answers are the days & nights efforts of the experts who refer to the IT authority data, summarize from the previous actual test and analysis from lots of practice data. So the authority and validity of 600-212 Implementing Cisco Service Provider Mobility LTE Networks (SPLTE) valid exam dumps are without any doubt. The amounts of Implementing Cisco Service Provider Mobility LTE Networks (SPLTE) questions & answers are modest, which wouldn't occupy you much time to do the training. You can adjust the test pattern according to your weakness points and pay attention to the questions you make mistake frequently with the help of 600-212 valid online test engine. Hurry up and try the 600-212 valid online test engine!
Secure shopping experience
Cisco respects customer privacy. We use Credit Card service to provide you with utmost security for your personal information & peace of mind. After purchase of Cisco Specialist valid exam dumps, your information will never be shared with 3rd parties without your permission. Please rest assured to buy the 600-212 Implementing Cisco Service Provider Mobility LTE Networks (SPLTE) valid training material.
After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
Cisco 600-212 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Lawful Intercept | 5% | 1 Describe lawful intercept architecture and events 2 Configure lawful interception 3 Describe lawful intercept trigger element |
| Charging | 13% | 1 Offline charging service a) Describe offline charging architecture b) Explain the GTPP protocol header and messages c) Explain charging data record transport through GTP' d) Compare and contrast GTPP transfer scenarios e) Describe and differentiate mobility records generated by MPC nodes f) Identify and list conditions for record closure and generation g) Explain Rf offline charging scenarios h) Identify and list offline charging error cases i) Configure for offline billing j) Troubleshoot for offline billing |
| PGW (4G LTE/EHRPD) | 15% | 1 Architecture overview a) Identify key functions of the PGW and basic understanding of architecture and interfaces 2 Implement S5/S8 and Gn/Gp interface a) Describe GTP protocol b) Describe mobility management/session management call flows c) Describe QoS in EPC d) Configure S5/S8 interface with corresponding services and system parameters e) Troubleshoot S5/S8 and Gn/Gp 3 APN a) Describe the various IP address allocation mechanisms b) Describe the concept of virtual APNs c) Configure APNs and virtual APNs with corresponding service and system parameters d) Configure IP source address validation and access control list e) Troubleshoot APN 4 Implement Gx interface a) Describe the important diameter AVPs needed for Gx b) Describe basic Gx call flows c) Configure Gx interface with corresponding services and system parameters d) Troubleshoot Gx interface e) Describe the common policy use cases f) Configure failure handling modes g) Configure usage monitoring over Gx 5 Implement Gy interface a) Describe the important diameter AVPs needed for Gy b) Describe the basic Gy call flows c) Configure Gy interface with corresponding services and system parameters d) Troubleshoot Gy interface e) Configure failure handling modes f) Describe OCS selection based on static configuration g) Describe RADIUS attributes and PCRF out-of-quota redirection handling 6 Implement AAA Interface a) Describe the basic AAA authentication and accounting call flows b) Describe the important RADIUS attributes for authentication and accounting c) Configure RADIUS interface with corresponding services and system parameters d) Troubleshoot RADIUS interface 7 Implement S6b interface a) Describe the important diameter AVPs needed for S6b b) Describe the basic S6b call flows c) Configure S6b interface with corresponding services and system parameters d) Troubleshoot S6b interface 8 Interworking with non-3GPP access networks a) Configure S2a interface with corresponding services and system parameters b) Configure S2b interface with corresponding services and system parameters c) Configure S2c interface with corresponding services and system parameters d) Configure LMA functionality on a PGW e) Configure non-3GPP IRAT handovers f) Troubleshoot S2b and S2c interfaces 9 SGi Interface a) Configure and implement various IP transport types b) Configure and implement static and dynamic routing protocols |
| Other Interfaces | 5% | 1 AAA/diameter related interfaces a) Describe SWx interface b) Describe S9 interface c) Describe Sp interface 2 HRPD related interfaces a) Describe S101 b) Describe S103 |
| LTE | 5% | 1 Describe and differentiate LTE / SAE architecture 2 Explain attach procedure and call flow |
| MME (4G LTE) | 16% | 1 Network functions LTE –MME a) Identify key functions of the MME and basic understanding of architecture and interfaces b) Describe MME states of MM and CM management c) Describe protocol stacks and procedures d) Describe mobility management signaling and call flows e) Describe session management signaling and call flows f) Describe location management signaling and call flows g0 Describe SGS procedures and signaling call flows h) Describe intra-MME handovers procedure i) Describe intra-RAT handovers procedure j) Describe inter-MME handover procedures 2 QOS architecture a) Describe the overall QOS functionality in LTE for single and multi pdn b) Describe the QOS mapping from UMTS to LTE 3 Configurations a) Configure S1 interface with corresponding services and system parameters b) Configure S6a interface with corresponding services and system parameters c) Configure S11 interface with corresponding services and system parameters d) Configure S13 interface with corresponding services and system parameters e) Identify and implement gateway selection mechanisms f) Identify and implement MME operator policy and feature sets g) Troubleshoot configurations 4 Network sharing a) Describe MOCN architecture b) Describe GWCN architecture 5 Security a) Describe LTE security principles for MME network node b) Explain security functions for mobility management procedures 6 Idle mode signaling reduction a) Identify IDLE mode signaling reduction in an LTE network b) Describe IDLE mode signaling establishment c) Describe IDLE mode signaling reduction deactivation 7 CSFB a) Describe CSFB architecture in LTE network b) Describe CSFB call flow and signaling 8 IPv6 support a) Configure IPV6 and dual stack EPS bearer scenarios b) Configure and implement transport plane IPV6 support for MME |
| Voice Over LTE | 20% | 1 VoLTE application messages/protocols a) Describe VoLTE specific diameter interface b) Describe XCAP, LDAP, SPML c) Describe CAMEL, CAP, INAP, SOAP, MSML 2 Voice over LTE architecture a) Describe voice evolution in mobile network b) Identify VoLTE system architecture and functions of network elements 3 Network elements in voice over LTE a) Describe CSCF b) Describe ENUM c) Describe MNP — mobile number portability/database d) Describe telephony application server e) Describe DRA/DEA f) Describe HSS g) Describe PCRF h) Describe ATCF,ATGW i) Describe MRF j) Describe understand OSS and BSS 4 QoS a) Describe QoS in EPS b) Describe end-to-end QoS in VoLTE 5 Interfaces and signaling messages a) Configure Gx interface and signaling b) Design Rx interface and signaling c) Implement Cx interface and signaling d) Describe ISC interface and signaling e) Describe Ut interface 6 End-to-end call flow a) Describe IMS client attach to EPC b) Describe P-CSCF discovery c) Describe IMS registration, re-registration and de-registration d) Describe mobile-originated VoLTE call e) Describe mobile-terminated VoLTE call f) Describe emergency VoLTE call 7 Supplementary services a) Describe IR.92 supplementary service overview b) Describe IR.94 supplementary service overview c) Describe Important services call flows 8 VoLTE Interworking a) Describe PSTN interworking b) Describe IMS/SIP interworking c) Describe e-SRVCC |
| Management Protocols | 11% | 1 TACACS a) Describe admin authentication and command authorization methods b) Configure Local administration levels c) Configure external authentication TACACS servers 2 Performance counters/statistics a) Describe the various performance counters b) Describe the collection and processing of performance counters c) Describe the common KPIs for various MPC nodes d) Configure counters and KPIs 3 Fault management a) Describe SNMP protocols, alarms, notification and MIBs b) Configure SNMP traps, filters and thresholds 4 syslog/events Log a) Describe system log formats and filters b) Configure syslog servers and event logs 5 Security a) Describe user access control 6 NTP a) Describe system timing b) Configure NTP servers, system clock, time zone and timestamps |
| SGW (4G LTE) | 10% | 1 Network functions LTE-SGW a) Identify key functions of the SGW and basic understanding of architecture and interfaces b) Describe SGW attach procedures and call flows c) Configure S1-U interface with corresponding services and system parameters d) Configure S5/S8 using PMIP/GTP interface with corresponding services and system parameters e) Configure S11 interface with corresponding services and system parameters 2 Feature functionality and extended application a) Describe multi-PDN support for SGW b) Describe downlink delay notification for SGW c) Describe idle mode signaling reduction support for SGW d) Configure and implement IPV6 support for SGW 3 Internetworking between LTE and other technologies a) Describe interaction with CDMA/eHRPD internetworking b) Describe interaction with GSM/UMTS internetworking c) Configure S4 interface with corresponding services and system parameters d) Configure S12 interface with corresponding services and system parameters e) Configure S103 interface with corresponding services and system parameters 4 Charging a) Configure Gx interface with corresponding services and system parameters 5 QoS a) Describe QoS bearer management and marking for SGW b) Configuring DSCP marking for SGW |
Cisco 600-212 Exam Certification Details:
| Exam Price | $300 USD |
| Number of Questions | 65-75 |
| Exam Name | Implementing Cisco Service Provider Mobility LTE Networks |
| Duration | 90 minutes |
| Exam Code | 600-212 SPLTE |
| Sample Questions | Cisco 600-212 Sample Questions |
| Recommended Training | Implementing Cisco Service Provider Mobility LTE Networks – (SPLTE) |
| Exam Registration | PEARSON VUE |
| Passing Score | Variable (750-850 / 1000 Approx.) |
Flexibility, suitable for different candidates
As we all know, the candidates for Cisco 600-212 exam test are with various levels. Some are with the basic PC skills and have some rudimentary IT technology about Cisco Specialist 600-212 exam. While other candidates are aimed at advanced problem of solving and analytical skills, and pursue for deep study and further technology. Here, 600-212 valid exam cram can fulfill all candidates' need. The 600-212 valid questions & answers are well-designed, containing the questions with different levels, which are suitable for different people. All the aims are to help you to pass the 600-212 exam test successfully. Except for the 600-212 valid training material, the good study methods are also important. It is necessary to make sure you understand the concept behind each question occurring in 600-212 valid exam dumps. It is a very big mistake if you just learn which answer is correct without understanding the concept. Do remember to take notes and mark the key points of 600-212 valid questions & answers. I believe that you will pass 600-212 exam test successfully.
Cherry 
Ivan 
Barlow 
Webb 
Arvin 
Edwina 
Allen 
Carol 
Roberta 
Hogan 
Mortimer 
Matthew 
Bing 
